Download Print this page
AAFIRST EZYTAP75 Installation And Operating Instructions Manual

AAFIRST EZYTAP75 Installation And Operating Instructions Manual

Instant hot water dispenser with ambient or chilled water

Advertisement

Quick Links

Installation and Operating Instructions
Instant Hot Water Dispenser with Ambient or Chilled Water
Installation and Operating Instructions
1

Advertisement

loading

Summary of Contents for AAFIRST EZYTAP75

  • Page 1 Installation and Operating Instructions Instant Hot Water Dispenser with Ambient or Chilled Water Installation and Operating Instructions...
  • Page 2: Read These Warnings First

    EZYTAP The EZYTAP75 is a High Performance Under Sink Boiler which also dispenses Ambient Water. The EZYTAP7800 dispenses Hot and Chilled Water by adding our Under-sink Chiller (UC800) and connecting it to the Ambient inlet of the EZYTAP75 UNIQUE SCALE PREVENTION SYSTEM The EZYTAP has two separate mains water inlets.
  • Page 3 Boiler on at the tap by holding the power button down for 8 – 10 seconds. How to connect the mains water from the UC800 Chiller to the EZYTAP75 Boiler to create the EZYTAP7800 –...
  • Page 4 Control Cable to Tap Cold Water Supply to Boiler (From Scale Filter) Circuit Breaker Cold water Outlet to tap Hot Water Outlet to Cold Water supply inlet (Carbon Filter) Voltage AC 220V, 50Hz Water Pressure Max 50 PSI Tank Capacity 4.2 Litres Power 2000 Watts...
  • Page 5 Filter Configuration for Hard & Soft Water EZYTAP7800 (EZYT75 + UC800C) EZYTAP 7800 (EZYT75 + UC800C) RECOMMENDED INSTALLATION FOR HARD WATER RECOMMENDED INSTALLATION FOR SOFT WATER Scale inhibiting filter to protect the EZYT75 Boiler in a hard water Single carbon block filter for use in a soft water area for both the area plus carbon block filter for odour and taste for the chilled EZYT75 Boiler and the UC800 Chilled water.
  • Page 6: Operating Procedures

    Operating Procedures NOTE: Please FOLLOW the procedures below for first-time use. After installation, ensure the water supply is switched on. Switch on at the mains plug and circuit breaker. Two dashes will be displayed on the tap. STEP 1 *** Press the “SAFETY” STEP 2 *** Press the button “HOT”...
  • Page 7: Accessories And Supplies

    Accessories & Supplies We can provide additional accessories and supplies for the EZYTAP75 & EZTYTAP7800. please visit our website http://www.aafirst.co.uk/ to see further information. FILTC150 Brita C150 Scale Filter for Water Boilers Purity C150 cartridge for scale reduction hot Water machines. A compact filter with evenly distributed flow prevents water "tunnelling"...

This manual is also suitable for:

Ezytap7800