Page 1
MAGNETIC HOLE CUTTING MACHINES GENERAL SAFETY INSTRUCTIONS PATENTIERT PATENTED „ONLY THE BEST“ KA38 – KA40 – KAS40 – KA50 – KAS50 KATV55 – KATSV55 – KA100 – KAS100 – KATV100 KATSV100 – KALP45 – KATV140 FOR MORE INFORMATION PLEASE VISIT...
Page 2
THOSE SPECIFIED. Never use a power tool for applications other Remove the tool from the work spindle by a slight impact on the drill than those specified in the instruction manual. drift. For more information please call +49 6203-4039-0 or send a mail to mail@karnasch.tools.
Page 3
40. THE MAXIMUM MAGNETIC HOLDING FORCE OF THE MACHINE IS OBTAINED FROM A MATERIAL THICKNESS OF 15 MM. Reduce feed at thicknesses below 15mm. Below 10mm material thickness magnetic hole cutting machines should not be used. For more information please call +49 6203-4039-0 or send a mail to mail@karnasch.tools.
Page 4
When cutter is fully in position with flats lined to the screws tigh- ten screws evenly to secure cutter in place ready for operation. For more information please call +49 6203-4039-0 or send a mail to mail@karnasch.tools.
Page 5
/ shaving beco- mes blue, add more coolant. For more information please call +49 6203-4039-0 or send a mail to mail@karnasch.tools.
• When completely out, stop machine and select for- ward. • Ready for next operation. For more information please call +49 6203-4039-0 or send a mail to mail@karnasch.tools.
Page 8
KARNASCH PROFESSIONAL TOOLS ® CNC TOOLS DIVISION Siemensstraße 1 D-68542 Heddesheim KARNASCH PROFESSIONAL TOOLS ® INDUSTRIAL TOOLS DIVISION Straße des Friedens 10 D-15848 Tauche / OT Görsdorf CONTACT Phone: +49 (0) 6203 4039-0 Fax: +49 (0) 6203 41590 E-Mail: info@karnasch.tools FOR MORE INFORMATION PLEASE VISIT WWW.KARNASCH.TOOLS...