DAEHAN BAR S Series User Manual

User Guide
SPECIFICATIONS
PRECAUTIONS
BAR S Series
ELECTRICAL
Model Current Dissipation
BAR S 960 400mA
BAR S 480 200mA
BAR S 240 100mA
BAR S 120 50mA
Electronic dimming control supported
PHYSICAL
Model Length
960mm
BAR S960
480mm
BAR S480
240mm
BAR S240
BAR S120 120mm
Use precautions to avoid damages to the product or injuries of users. Any actions against following contents will cause serious
issues such as malfunction, electric shock, or burn.
USE DC24V ONLY
AC INPUT DO NOT USE AC INPUT
Do not cut or rejoion wires while product
is connected wth live power source
Avoid performing installation under rain or
high humidity for outdoor use
Do not use the product under circumstances
listed below
- High temperature spots over 60˚C (140˚F)
- Spots draw extreme moisture or dust
- Spots have corrosive gas or highly effectied
by electromagnetic field
DAEHANTRANS CO.,LTD
#7-11 Songdo-Dong, Yeonsu-Gu, Incheon, Korea
Tel. +82 32 858 0491 Fax. +82 32 832 8421 enquiry@daehantrans.com / www.daehantrans.com
Power Dissipation Operating Power
9.6W
4.8W
2.4W
1.2W
Width Thickness Weight
21mm 9.5mm
21mm 9.5mm
21mm 9.5mm
21mm 9.5mm
Max Serial Connection
DC24V 5.0 Meters
DC24V 5.0 Meters
DC24V 5.0 Meters
5.0 Meters
DC24V
LED Lamp Pitch
224g 20mm
106g 20mm
56g 20mm
26g 20mm
Epoxy Molding
Do not perform actions listed below
- Alter or modify
- Touch LED lamps with sharp objects
- Put glue or silicon over the LED lamps
Maximum driver quantity per serial
connection is limited. Failure causes overload
of current and damages to the product
Refer to 'WIRE THICKNESS' table to use proper
wire thickness between SMPS and the first
LED module
Failure will cause dimmed output
Cable length between SMPS and the first LED
module is limited. Refer to 'CONNECTION
WITH POWER SUPPLY' on page 2
1
IP65