Advertisement
Quick Links
FEATURES:
SPECIAL MECHANICAL FEATURES:
- Mechanical Lock for stop Button
- Battery Hatch back, open by the rope holder
CHRONOGRAPH
- Display of Lap, split and running chronograph.
- Measure up to 9 hours 59 minutes and 59.99 seconds.
- 300 recallable lap and split memories for ULTRAK 493 and 494; 60-memory for ULTRAK 485.
- display of fastest (FS), Slowest (SL) and average (AV) lap times for the laps traversed.
- lap counter (00-999).
- Electro-Luminescent backlighted LCD in ULTRAK 494 only.
TIMER:
- Presettable countdown timer, maximum 10 hours.
- Automatically recycles upon completion of countdown and cycle counter to keep track of cycles
counted.
- 30 seconds shuttle-countdown for timeout period timekeeping.
PACER:
- Presettable from 10 beeps/minute to 320 beeps/minute.
- Display of pacer frequency, beep counter and total time elapsed simultaneously.
CLOCK:
- Hour, minutes, seconds, month, date, day and year, auto calendar.
- Alarm hour and minutes.
- 12/24 hour and European calendar user option.
CHRONOGRAPH OPERATION
ULTRAK 485 60 - Memory Version
ULTRAK 493 300 - Memory Version
ULTRAK 494 EL Version
OPERATING INSTRUSTIONS
- Depress C to select the operating mode. The chrono indicator is
shown. Depress A to start.
Remarks: user may move the lever, at the back of button A, to
prevent accidental stop of the running chronograph.
- Depress B to read the 1st Lap time. LAP is shown at the upper
row, SPLIT is shown at the middle row and the RUNNING
CHRONO is shown at the bottom row.
- Depress B to display the 2nd Lap time. The 2 digit in dot matrix
format at the top left corner is the Lap counter.
1
Advertisement
Summary of Contents for CEI-Ultrak ULTRAK 485
- Page 1 - Measure up to 9 hours 59 minutes and 59.99 seconds. - 300 recallable lap and split memories for ULTRAK 493 and 494; 60-memory for ULTRAK 485. - display of fastest (FS), Slowest (SL) and average (AV) lap times for the laps traversed.
- Page 2 - Depress A to stop counting. Remarks: make sure the button is unlocked before the operation. - Depress D to recall 1st Lap data (memory can be recalled anytime when the chronograph is either running or stopped). - Depress D again to recall the 2nd Lap data. - Depress D again to recall the stopped time.
- Page 3 TIMER OPERATION - Depress C to select the TIMER mode. Depress B to select digits and A to set digit. Digits will be advanced by + 1 for every depress of A. When the seconds digits are set, depress B to complete the setting process.
- Page 4 3. Install a fresh lithum battery CR2032 into the battery holder, please make sure the Battery Lock is in the position shown. 4. Re - install the battery cover, turn the dot from open to close position. BK 151.1 www.cei-ultrak.com Printed in China...