Advertisement
Table of Contents
- 1 Directions for Use
- 2 Using the Setting Circles to Locate Stars
- 3 Adjusting the Finderscope
- 4 Pan Head Mount 60050 & 40070 & 40080
- 5 Azimuth Mount 70060 & 80060 & 70076
- 6 Equatorial Mount 90060 & 900114
- 7 Barlow Lens
- 8 Very Important General Remarks
- 9 Caution
- 10 Parts & Accessories
- Download this manual
Advertisement
Table of Contents
Related Manuals for Barska 40070
Summary of Contents for Barska 40070
- Page 1 Directions for use 40070 40080 60050 70060 70076 80060 90060 900114...
- Page 2 Fig. 1 Fig. 1A Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7...
- Page 3 2) Connect all three tripod legs to the tripod head with the wing nut and screw in the manner as indicated in Fig. 2a). b) For model 40070 / 40080 & 600X50 proceed as in figure 1A setting up the pre moun- ted tripod and connecting it to the telescope with the micrometric screw that regulates the movement of the telescope.
- Page 4 6) Insert the angle prism into the focusing tube (17). Secure by tightening the correspon- ding fastening screws (see Fig. 5.) for model 90060 & 900114 see (Fig. 9). 7) Insert the eyepiece (13) into the angle prism (16). This also has to be adjusted with the small fastening screw (see Fig.
- Page 5 All screws can be finally tightened as soon as the setting with the eyepiece coincides with that of the finder scope. PAN HEAD MOUNT 60050 & 40070 & 40080 The telescope is fitted with a pan head mount. The movement of the telescope is done by movements whilst turning the main bolt.
- Page 6 magnification of 100x -125x can be expected with 60 mm diameter objective lens to obser- ve most celestial objects. A lower magnification power is advisable for the observation of stars. The field of view is wider so that the object for observation is more easily localized. The highest magnification power should only be used for particularly clear observations of the moon an object that is relatively close and exceptionally bright, so that good detail resolu- tion is achieved at high magnification ratios.
- Page 7 For repair service please bring your product back to the point of sale or contact your local distributor which you can locate in the yellow pages or on our website: www.barska.com All costs to and from the repair centre such as travel, carriage costs, postage, insurance charges etc.