Page 1
User Manual V1.4 Date: 2011.02.18 Zigbee RS-232/DI/DO/AI Adapter User manual for ZA-L2 and ZA-H5 models ZA-L2 ZA-H5 Low Power High Power External 2 dBi Dipole Antenna External 5 dBi Dipole Antenna Adapter Model Comparison .Packing Contents 1. Packing Contents 1.1 ZA-L2 Package Contents: 1.1 ZA-H5 Package Contents:...
Page 2
User Manual V1.4 Date: 2011.02.18 .Product description Firmware Switching by DIP Switch Profiles C: Coordinator R: Router RS-232 DB9 Connector D: Device Blue LED: Analog Blue LED: Digital DIP Switch for Firmware Mini USB Red LED: Power External Battery Jack Digital I/O Jack Analog Input Jack 2.2 Network...
Page 3
User Manual V1.4 Date: 2011.02.18 3.5 Connect the adapter with PC or NB via RS-232 interface. 3.6 If the PC or NB doesn’t equip with the RS-232 DB9 connector, you will need the USB to RS-232 converter. Please install the driver for the converter installed before the COM port work.
Page 4
User Manual V1.4 Date: 2011.02.18 4.2 Example: Digital I/O Battery power Input Analog Input Remark: One power line is included in the package. If you need more cable for I/O connector, please call. 5. LED Status: Status Description Power LED steadily ON (Red) Power ON Power LED blinking (Red, 0.5 sec.) Low power (Battery)
Page 5
User Manual V1.4 Date: 2011.02.18 No Zigbee manager software necessary. Please power on the adapters by the following procedures with the same PAN ID and Channel no.. Step 1: Power on the Coordinator and R1 for pairing and power off the other adapters Step 2: Power off the Coordinator.
Page 6
User Manual V1.4 Date: 2011.02.18 8.4 The routers or end devices will be listed on the each window, please check the screen. Be sure the COM port is opened successfully. 8.5 Short address: You can set the transmission with or without short address by click the box. Please power off the adapter after setting and new setting will be available after power on.
Page 7
User Manual V1.4 Date: 2011.02.18 COM Port: 9,600 bps, 8,N,1 (8 data bits, None Parity, One Stop Bit) PAN ID: ffff, The different setting will set the private network which will not be connected by other Zigbee devices. Channel: 25 CH, The different setting will set the private network which will not be connected by other Zigbee devices.
User Manual V1.4 Date: 2011.02.18 11. Internet of things 11.1 RS-232 to Ethernet converter (Optional) 10/100 Mbps Ethernet RS-232/422/485 Interfaces 7~40 VDC Power Input COM port Setup or firmware upgraded by web browser DB9 Pin 9 supplies 5 VDC for external Zigbee or Bluetooth RS-232 Adapters (Model: IP-S) 11.2 Connection: 11.3 Virtual COM port via Internet: You can set the COM port via Internet.