Page 1
Merlin CS1 & CS2 User Guide Gas Safety Products CS1 & CS2 Current Switches User Guide Please read this guide carefully and retain for future use. Rev: 02 05-19...
User Guide General information The Merlin CS1 & CS2 Current Switch is to be used in conjunction with the Merlin range of kitchen ventilation interlock systems and can be used as an alternative to air pressure differential switches. AC Current Switch Device The AC current switches activate a normally open (NO) contact closure via a solid state switch whenever the monitored primary circuit current exceeds a pre-set level.
Merlin CS1 & CS2 User Guide Installation Remove the front cover of Current Monitor to access the current switches. Ensure the output circuit to be switched is within the device/s switch rating - see specification. The current switch device/s requires that the live to be monitored be disconnected and routed through the centre of the device and looped at least once.
Merlin CS1 & CS2 User Guide Typical Current Switch Device Example Maintenance To keep your device in good working order, you must follow these steps: DO carefully remove any accumulated dust from the outer enclosure once a month. NEVER use detergents or solvents to clean your device – this may permenantly or temporarily ...
Merlin CS1 & CS2 User Guide Manufacturer’s Warranty 3 Year Limited Warranty Warranty coverage: The manufacturer warrants to the original consumer purchaser, that this product will be free of defects in material and workmanship for a period of three (3) years from date of purchase. The manufacturer’s liability hereunder is limited to replacement of the product with repaired product at the discretion of the manufacture.