Advertisement
Quick Links
Evaluation Note for MCA1101/MCR1101
±5A ±20A ±50A, 5V Isolated Current Sensors
EVB EB0013 Rev A
ACEINNA, Inc.
One Technology Drive, Suite 325, Andover, MA 01810, USA
Tel: +1-978-738-0900, Fax: +1-978-738-0196, www.ACEINNA.com
Information furnished herein by ACEINNA is believed to be accurate and reliable. However, ACEINNA assumes
no responsibility for its use, or for any infringements of patents or other rights of third parties resulting from its use.
No license is granted by implication or otherwise under any patent or patent rights of ACEINNA. ACEINNA reserves
the right to change this document without notification.
MCx1101 Evaluation Note Ver1.5 – Dec. 14, 2018 Page 1 of 4
Advertisement
Related Manuals for Aceinna MCA1101 Series
Summary of Contents for Aceinna MCA1101 Series
- Page 1 No license is granted by implication or otherwise under any patent or patent rights of ACEINNA. ACEINNA reserves the right to change this document without notification.
- Page 2 DESCRIPTION The EB0013 evaluation board provides a simple way to evaluate MCx1101 family of current sensor ICs. This double sided PCB with 4-ounce copper produces the low resistance path to the galvanically isolated primary current. An 8-pin connector P1 and test points enable users to easily access the signals of the secondary side bias and outputs.
-
Page 3: Operating Instructions
OPERATING INSTRUCTIONS Connect power supply to positive terminal and negative terminal to VCC and GND of P1, respectively Connect multimeter, oscilloscope, or other signal measurement devices to VOUT, VREF and GND through either P1 connector, test points, or BNC connectors ... - Page 4 EB0013 REV A PHOTO BILL OF MATERIALS Reference Design Item Value Package Rating Description 1/10W R1,R2 4.7KΩ 0603 Pull up resistor 1/10W 100Ω 0603 Input limit resistor 1/10W 10KΩ 0603 Pull up resistor Reference PIN coupling capacitor(NP 10nF X7R Ceramic/0603 for MCA1101) 0.1uF X7R Ceramic/0603...