Page 1
PBZ USB PKI device PBZ USB PKI device In order to be able to use eToken NG Flash (Photo 1), eToken 7300 (Photo 2) or eToken 5110 (Photo 3) device, i.e. in order to be able to access the PBZCOM@NET service via the mentioned devices, one-off installation of software will be required.
Page 2
1. It is necessary to install software before plugging in the device, downloading FINA certificates and accessing the PBZCOM@NET service. a. For Windows 64-bit version, it is necessary to download and install: SafeNet 9: http://com.pbz.hr/download/SafeNetAuthenticationClient-x64-9.0.msi SmartCard Management: http://com.pbz.hr/download/SCM_x64.exe b.
Page 3
1. Plug the PBZ USB PKI device in a free USB port on your computer. 2. Start SafeNet Authentication Client (there are two ways of doing it): a. Right-click on the icon SafeNet Authentication Client at bottom right of the screen, next to the system clock, and choose the option Change Token Password (Figure 4) or Figure 4 –...
Page 4
INSTRUCTION FOR INSTALLATION OF PBZ USB PKI DEVICE 3. Enter the current PIN in the field Current eToken Password, and then enter a new PIN in the field New Token Password and the field Confirm New eToken Password (Slika 6). After filling in all the fields, you will be able to click on the OK button (Slika 7).
Page 5
3. Unlocking of the PBZ USB PKI device The devices eToken NG Flash or eToken 7300 PBZ USB PKI will be locked after entering an incorrect PIN 5 times in a row. For a device to continue functioning normally, it has to be unlocked by using an Unlock code.
Page 6
Token Password and Confirm Password), which will become active by clicking on OK (Figure 13). Figure 12- screen for entering the unlock code Figure 13 – screen for entering a new PIN Close the application SafeNet Authentication Client Tools and log in again in PBZCOM@NET (http://com.pbz.hr/).