Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LOG IMAGE
Summary of Contents for LOG IMAGE
- Page 1 User Manual IMAGE...
-
Page 2: Table Of Contents
User Manual Digitally optimized, active high-end wall speaker Congratulations on the purchase of LOG Audio‘s high-quality IMAGE wall speaker, which was manufactured under strict quality and environmental standards. To get the most out of all features, please read this manual carefully. We advise you to keep this manual for future reference. -
Page 3: Delivered Items
- The fabric cover can be easily attached or removed. - The IMAGE is only suitable for wall mounting. Before mounting, make sure the wall on which the IMAGE is to be mounted is strong enough to support the unit. In case of doubt, please contact a specialist. To attach the IMAGE to the wall it is necessary to mount two suitable brackets (screws or similar) at a distance of 34 cm from the wall. -
Page 4: Integrate Prolog Into Your Home Network
Streaming - wireless music playback with PROLOG 2 In combination with the PROLOG 2 you can stream music from a variety of sources wirelessly to the IMAGE wall speakers. For this you need a wireless connection from your audio source (smartphone, tablet, etc.) to the PROLOG 2. The built-in Bluetooth, AirPlay®... -
Page 5: Prolog - Volume Adjustment With Remote Control
If you press the “Mute“ button you can mute the PROLOG 2 or deactivate the mute function. Note: Be sure to point the remote at the PROLOG 2 as soon as you press a key. Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | office@logaudio.com | www.logaudio.com... -
Page 6: Wake-Up Function
PROLOG 2 accepts commands from any remote control of the same type. Wake-up function In case of inactivity, the IMAGE automatically activates the standby mode after a while to avoid unnecessary power consumption. The automatic wake-up functionality automatically reactivates the IMAGE wall speaker when there is an incoming audio signal. -
Page 7: Repair
The IMAGE wall speaker can reach a sound pressure level higher than 90dB (SPL), which could cause hearing loss. To avoid hearing damage, you should therefore only use the IMAGE wall speakers for a short time at high volume. As a precaution, set an appropriate volume. -
Page 8: Troubleshooting (Prolog 2)
- regardless of your PROLOG. In such a case, please contact a WiFi or network specialist. Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | office@logaudio.com | www.logaudio.com...