Page 1
Installation, Operation and Maintenance Manual for Model WSUV Series UltraViolet Modules Please read complete manual prior to proceeding with the installation of the modules. Failure to follow instructions and/or operating parameters as specified in the manual by the manufacturer may lead to the product's failure.
® • UV Ballast: One ballast model powers all (WSUV-4, WSUV-6 and WSUV-8) WaterSentinel brand UV models for use with North American outlets (120V AC, 60Hz). • UV Lamp: Assembled with high quality components, the UV Lamp is designed to deliver 12 months of uninterrupted service.
Using QuickConnect fittings To make connection To Disconnect Push the tube all way to the tube stop. The Push in the collet against the face of the collet has stainless steel teeth which hold quick connect fitting. With the collet held in the tube firmly in position while the o-ring this position, the tube can be removed.
Maintenance The UV Module should be replaced every 9,000 hours or 12 months. 1. Locate and turn off the cold water supply valve that feeds the water to the filtration system. 2. Unplug the ballast from electrical outlet and disconnect at connector from the UV Module. 3.
Performance Data Sheet TST Water, LLC 42188 Rio Nedo Temecula, CA 92590 WSUV-4, WSUV-6, WSUV-8 GENERAL USE CONDITIONS: System to be used with municipal or well water sources treated and tested on regular basis to ensure bacteriological safe quality. DO NOT use with water that is microbiologically unsafe or unknown quality without adequate disinfection before and/or after the system.
Limited Warranty Unless otherwise provided in a warranty for the specific product purchased, Seller hereby warrants that all goods purchased hereunder shall be free from material defects in material and workmanship for a period of one (1) year from the date of shipment to Buyer. The foregoing warranty shall not be valid if the product or component parts have been subjected to abuse, misuse, accident, alteration, neglect, unauthorized repair or installation.