Central Brass 0046-A Installation Instructions

Central Brass
MODEL NO. 0046-A
C O M P A N Y
SINK FIXTURE
Brecskville, Ohio 44141
Phone: (216) 883-0220 Fax: (440) 526-5745
www.CentralBrass.com
O-Ring Compression 1/4-Turn Compression
0046-A 0046-A-Q
The sink faucet body is a solid brass casting designed
for ledge mounting. The body is polished and copper,
nickel, and chrome plated. The inlet supply connec-
tions are fixed at 8-inch centers. The inlets are 1-1/2
inch NPS female pipe connections. The stems are
all brass with a double O-Ring seal and rubber seat
washer. The canopy handles are zinc die cast with a
chrome plated finish. The 6-inch swivel spout is brass
with a chrome plated finish and is fitted with a water
saving aerator that limits the flow rate. The O-Rings
and seals are rubber. The soap dish and post are brass
with a chrome plated finish.
Flow Rate: 2.0 GPM @ 60 psi
ADA Compliant and Meets ASME A112.18.1M
ANSI/NSF 61/Section 9 Certified
Certified to
ANSI/NSF 61 Section9
Installation Drawing
06-20-2008