Central Brass 0045-A Installation Instructions

Central Brass
MODEL NO. 0045-A
C O M P A N Y
SINK FIXTURE
Brecksville, Ohio 44141
Phone: (216) 883-0220 Fax: (440) 526-5745
www.CentralBrass.com
O-Ring Compression 1/4-Turn Compression
0045-A 0045-A-Q
The sink faucet body is a solid brass casting designed for
ledge mounting. The body is polished and copper, nickel,
and chrome plated. The inlet supply connections are fixed
at 8-inch centers. The inlets are 1-1/2 inch NPS female
pipe connections. The stems are all brass with a double
O-Ring seal and rubber seat washer. The canopy handles
are zinc die cast with a chrome plated finish. The 6-inch
swivel spout is brass with a chrome plated finish and is
fitted with a water saving aerator that limits the flow rate.
The O-Rings and seals are rubber.
Flow Rate: 2.0 GPM @ 60 psi
ADA Compliant and Meets ASME A112.18.1M
ANSI/NSF 61/Section 9 Certified
Certified to
ANSI/NSF 61 Section9
Installation Drawing
06-20-2008