Related Manuals for Aiwa NSX-AJ700
Summary of Contents for Aiwa NSX-AJ700
- Page 1 Compact Disc Stereo System NSX-AJ700 For assistance and information (United States and Puerto Rico) 8B-NFJ-903-01 010126BMI-U-M OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES MODE D'EMPLOI (English) (Español) (Français)
-
Page 2: Precautions
PRECAUTIONS Read these Operating Instructions carefully and completely before operating the unit. All precautions on this booklet and on the unit should be strictly followed. Keep the Operating Instructions for future reference. WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. -
Page 3: Table Of Contents
CD OPERATIONS ... 10 RADIO OPERATIONS ... 12 TAPE OPERATIONS ... 14 SOUND ADJUSTMENTS ... 17 TIMER OPERATIONS ... 18 REFERENCE ... 20 System and accessories NSX-AJ700 CX-NAJ700 Compact disc stereo cassette receiver SX-NAJ702 Front speakers Remote control FM antenna AM antenna... -
Page 4: Preparations
PREPARATIONS Connection Plug in the AC power cord to the AC power outlet after all other connections are made. 1 Connect the front speakers. Connect the right front speaker to the SPEAKERS R terminals and the left to the SPEAKERS L terminals. The speaker cords with the white stripes go to the 0 terminals. -
Page 5: Parts And Controls
PARTS AND CONTROLS Main unit: rear 1 AM LOOP, FM 75 terminals Plug in the supplied AM and FM antennas here. 2 VIDEO/AUX jacks Accepts analog sound signals from external equipment. Connect using an optional connecting cable with RCA phono plugs (red plug to R jack, white plug to L jack). Refer also to the operating instructions of your equipment. -
Page 6: Disc Change
Main unit: front 1 POWER 6STANDBY/ON Switches the unit on and off (standby). DEMO Switches DEMO on and off. 2 CD EDIT/CHECK Displays the remaining playback time of a CD when pressed during playback. Enters AI Edit Recording or Programmed Edit Recording mode when pressed during stop. - Page 7 Remote control Buttons with same or similar names with the main unit basically have the same function. 1 DISC DIRECT PLAY 1-3 2 0-9, +10 CD: selects a CD track of the specified number. Radio: tunes in to the station with the specified preset number.
-
Page 8: Adjustments Before Operations
ADJUSTMENTS BEFORE OPERATIONS Power Turning the unit on Press POWER 6 STANDBY/ON (POWER on the remote control). Or press TAPE, TUNER/BAND, VIDEO/AUX or CD, the playback will start automatically if a disc or tape is inserted. Turning the unit off Press POWER 6STANDBY/ON again. -
Page 9: Eco Mode
ECO mode Reduces power consumption with the following operations, etc. ECO ON mode - The unit blacks out when the unit is turned off. Only the red indicator lights up. (Only when the clock is set.) - If dimmer mode is set to on, the unit illumination brightens (for 10 seconds) only when you operate the unit. -
Page 10: Cd Operations
CD OPERATIONS This unit plays back finalized CD-R/RW discs as well as audio CDs. * Open the control panel with PANEL OPEN/CLOSE if needed. Playback 1 Press CD and load disc(s) Press zCD OPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labeled side up. To place three discs, press DISC CHANGE so that the trays rotate, then place the third one. -
Page 11: Programmed Playback
Programmed playback Plays back up to 30 selected tracks in programmed order. 1 Press SHIFT+PRGM on the remote control during stop. "PRGM" lights up on the display. 2 Press DISC DIRECT PLAY 1-3 to select a disc. Go to the next step when the tray stops rotating. 3 Press the numbered buttons on the remote control to program a track. -
Page 12: Radio Operations
RADIO OPERATIONS * Open the control panel with PANEL OPEN/CLOSE if needed. Manual tuning 1 Press TUNER/BAND (SHIFT+BAND on the remote control) repeatedly to select a band. The unit switches to the radio from any other function and alternates between FM and AM. 2 Press fDOWN or gUP to tune in to a station. - Page 13 Adjustments Antennas Keep antennas away from metallic objects, electrical equipment and cords. FM antenna: Extend fully in a T-shape. If receiving condition is poor, connect optional outdoor antenna to FM 75 terminal. Be sure to connect the shield braid of the antenna to the 2 terminal.
-
Page 14: Tape Operations
TAPE OPERATIONS * Open the control panel with PANEL OPEN/CLOSE if needed. Playback Use only type I (normal) tapes. 1 Press TAPE and insert the tape in either deck. Press zPUSH EJECT to open the cassette holder, and insert with the exposed side down and playback side facing out from the unit. -
Page 15: Ai Edit Recording
•Volume or tone adjustment does not affect recording. •"Can’t REC" is displayed if you attempt to record a tape with the tab broken off. To stop recording Press s. To pause recording (only for TUNER or VIDEO/AUX source) Press a. Press again to resume. To record a selected set of tracks from a CD Program the desired tracks (see "Programmed playback") and then press wREC/REC MUTE. - Page 16 Programmed Edit Recording As you program the CD tracks to record, Programmed Edit Recording displays the remaining recording time for each side of the tape, so you can easily select a set of desired tracks within the length of your tape. 1 Insert the recording tape in DECK 2.
-
Page 17: Sound Adjustments
SOUND ADJUSTMENTS * Open the control panel with PANEL OPEN/CLOSE if needed. Enhances high frequency for sound clarity . Press BBE repeatedly to select one of the three enhancement levels or the off position. •When the sound becomes distorted with the BBE effect, cancel it. -
Page 18: Timer Operations
TIMER OPERATIONS * Open the control panel with PANEL OPEN/CLOSE if needed. Sleep timer Turns off the unit automatically after a specified time. 1 Press SHIFT+SLEEP on the remote control. "SLEEP" appears on the display. 2 Press f or g repeatedly to set the sleep timer duration. -
Page 19: Timer Recording
To display the timer setting Press TIMER. The timer-on time, the source and the timer-activated duration are displayed for 6 seconds. Tip: Timer setting can be displayed even while the unit is turned off, and at that time if you press ENTER or a within 6 seconds after TIMER is pressed, you can enter the timer setting mode and change the setting. -
Page 20: Reference
Cannot record. •Is the erasure prevention tab of the tape broken off? If so, cover the detection slot with adhesive tape. The CD player works poorly. •Is the disc correctly loaded? •Is the disc dirty? •Is the lens affected by condensation? If so, wait approximately one hour and try again. -
Page 21: Specifications
Recording system AC bias Heads DECK 1: playback x 1 DECK 2: recording/playback x 1, erase x 1 CD PLAYER Laser Semiconductor laser ( = 780 nm) D/A converter 1 bit dual Signal-to-noise ratio 85 dB (1 kHz, 0 dB) Harmonic distortion 0.05 % (1 kHz, 0 dB) - Page 22 NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.