The Flashlite LED Curing Light is supplied with the lens cap attached. 9. Suitable blue-filtering safety goggles must be worn by patient A button on the Flashlite LED Curing Light turns the light on and off. and dentist during use.
Page 5
Use the log to monitor system performance. output of the Flashlite LED Curing Light. It is recommended that the lens Note: If a cavity preparation is deep, curing exposure times must also cap be replaced every 2-4 weeks.
Page 6
10% to 90% Non-condensing Atmospheric Pressure .5 atm to 1.0 atm (500 hPa to 1060 hPa) Note: If only 3 lights are illuminated, try tilting the Flashlite at a slight angle to illuminate all 4 lights. 2-year Warranty Den-Mat Holdings, LLC warranties your Flashlite LED Curing Light...
Guidance and Manufacturer's Declaration - Electromagnetic Emissions The Flashlite Magna 4.0 and 2.0 Curing Lights are intended for use in the electromagnetic environment specified below. The customer or the user should assure that they are used in such an environment.
Page 8
LED Dental Curing Lights Instruction Manual Den-Mat Holdings, LLC 1017 W. Central Avenue Lompoc, CA 93436 USA 800-433-6628 denmat.com Symbols Glossary available at: denmat.com MDSS GmbH Contact your DenMat Representative, EC REP Schiffgraben 41 or local distributor for further information. 30175 Hannover, Germany 4010489 Conforms to AAMI Std ES60601-1, IEC Stds 60601-1-6, 80601-2-60 &...