Advertisement
Quick Links
TECHNICAL
TECHNICAL
T
T
E
L
E
E
L
E
Model VCAM-1
and VCAM-1IR
replacement for the cameras included in the following Viking models: AES-2005, E-35, E-50,
E-65, E-75, K-1205, K-1705-3 and W-3005.
The VCAM-1IR has a day/night OLP (optical low pass) filter and is compatible with standard
840-850nM IR illuminators. The VCAM-1IR is the same size as the VCAM-1 allowing it to be
used in all of the above Viking products.
All cameras are equipped with Enhanced Weather Protection (EWP) for outdoor installations
where the unit is exposed to precipitation or condensation. The VCAM-1, VCAM-1IR and
VCAM-2 feature sealed connections, as well as an epoxy potted circuit board.
F
e
a
t
u
r
e
s
F
e
a
t
u
r
e
s
VCAM-1 / VCAM-1-IR / VCAM-2 Features:
• High resolution color composite video camera with wide 80° viewing
angle, tilt/swivel adjustments, and wide operating temperature range
• Designed for outdoor use, all cameras come standard with Enhanced
Weather Protection (EWP), see DOD 859 for more information
• All cameras designed to meet IP66 Ingress Protection Rating
• 12V DC adapter and wire connectors included
• VCAM-1-IR only: IR illuminator compatible
VCAM-2 Features:
• Compact size: Front panel is the size of a typical single gang midsize
wall plate
• Mounting: Flush mount in a single gang electrical box (2.25" deep x
2.00" wide x 2.84" tall min) electrical box or surface mount in a Viking
model VE-3x5 (not included, see DOD 424)
• Available in 2 standard faceplate finishes: Brushed Stainless Steel
and Oil Rubbed Bronze
• PNL-VCAM-2 faceplates: Replacement faceplates with matching
screws available in both finishes
• Vandal Resistant Features: 18 gauge 304 stainless steel faceplate,
stainless steel camera mounting plate, scratch resistant powder
coating, impact and scratch resistant camera lens, and hex drive
mounting screws
• Weather Resistant Features: Faceplate gasket, sealed camera lens,
potted camera circuit board, stainless steel camera mounting hardware
• VCAM-2-BN only: UV stable weather resistant powder coating
S
S
C
O
M
O
L
U
T
I
O
N
S
C
O
M
O
L
U
T
I
O
N
S
Compact Color Camera Kits and
Single Gang Mountable Cameras
The VCAM-1 and VCAM-1IR are high resolution color composite video cameras. Their compact
size will allow mounting in even the smallest locations. The extreme temperature rating of this cam-
era, makes it ideal for mounting in outdoor locations in a water tight enclosure.
The VCAM-2 is a compact, high resolution color composite video camera mounted behind a stan-
dard single gang wall plate. The VCAM-2 is available in two finishes: Brushed Stainless Steel
(VCAM-2-SS) and Oil Rubbed Bronze (VCAM-2-BN). The extreme temperature rating and
Enhanced Weather Protection make this camera ideal for mounting
in outdoor locations.
The VCAM-1 is not compatible with IR illuminators and is a direct
P
r
a
c
P
r
a
c
2
1
C
2
1
C
F
O
R
T
H
E
S
T
F
O
R
T
H
E
S
T
A
p
p
l
A
p
p
l
• Door entry
• Gate entry
• Covert surveillance
S
p
e
c
S
p
e
c
Shipping Weight: VCAM-1 / VCAM-1-IR: 1.0 lbs (0.45 kg)
Operating Temperature: -40°F to 185°F (-40°C to 85°C )
Connections: (3) gel-filled butt connectors (3M Scotchlok UR2)
(See page 2 for complete specifications)
VCAM-1/1IR
VCAM-1/1IR
VCAM-2
VCAM-2
Compact Color
t
i
c
e
t
i
c
e
Video Camera Kit
E
N
T
U
R
Y
E
N
T
U
R
Y
i
c
a
t
i
o
n
s
i
c
a
t
i
o
n
s
P
h
o
n
e
:
P
h
o
n
e
:
i
n
f
o
@
v
i
k
i
n
g
e
l
i
n
f
o
@
v
i
k
i
n
g
e
l
w
w
w
.
V
i
k
i
n
g
E
l
w
w
w
.
V
i
k
i
n
g
E
l
i
f
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
VCAM-2: 0.8 lbs (0.36 kg)
April 27, 2018
Model VCAM-2
7
1
5
-
3
8
6
-
8
8
6
1
7
1
5
-
3
8
6
-
8
8
6
1
e
c
t
r
o
n
i
c
s
.
c
o
m
e
c
t
r
o
n
i
c
s
.
c
o
m
e
c
t
r
o
n
i
c
s
.
c
o
m
e
c
t
r
o
n
i
c
s
.
c
o
m
Advertisement
Related Manuals for Viking VCAM-1
Summary of Contents for Viking VCAM-1
- Page 1 E-65, E-75, K-1205, K-1705-3 and W-3005. The VCAM-1IR has a day/night OLP (optical low pass) filter and is compatible with standard 840-850nM IR illuminators. The VCAM-1IR is the same size as the VCAM-1 allowing it to be used in all of the above Viking products.
- Page 2 TWO YEAR LIMITED WARRANTY Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number.
- Page 3 A. Surface Mounting the VCAM-2 A Viking model VE-3x5 can be used to surface mount a VCAM-2 to a wall or post. Recommended mounting height to bottom of VE-3x5 is 50” - 54”. Drill a small wire exit hole in wall. Pull wire through and seal hole around wire with putty or caulking.
- Page 4 20 degrees. Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.