Summary of Contents for Tamarack Technologies UNI-RV40
- Page 1 Mount Series Installation Manual UNI-RV40-MAN 2017 Edition v1.0 For model: UNI-RV40...
-
Page 2: Table Of Contents
Mount Series Table of Contents Introduction ............................... 1 Customer Support ............................. 1 Tools Required ................................1 Step 1: Pre Assembly ............................3 Step 2: Final Assembly Attaching clamps to the panel ..................3 Step 3: Torque Bolts............................. 3 Step 4: Preparation to mount to a surface......................4 Step 5: Attach Panel Supports to any surface .................... - Page 3 Mount Series Installation Manual Components List The following parts are for the UNI-RV40 mount model: ITEM PART NUMBER DESCRIPTION QTY. 51-04PS-40R REV A Panel Support Right 51-04MB-40R REV A Mount Base Right 51-04BR-40R REV A Brace Right 51-04PS-40L REV A...
-
Page 4: Step 1: Pre Assembly
Mount Series Installation Manual Pre Assembly Step 1: A. Lay the panel down with the frame side up. B. Lay the pre-assembled panel supports on each end, across the width of the panel with the slotted face on the panel frame, and centered facing the inside. C. -
Page 5: Step 4: Preparation To Mount To A Surface
Mount Series Installation Manual Step 4: Preparation to mount to a surface. A. Now that the panel support assemblies are attached to the panel, take a measurement between the mounting holes from one side to the other. Step 5: Attach Panel Supports to any surface A. - Page 6 Mount Series Installation Manual 2018 v1.0 info@tamaracksolar.com (800) 819-7236...
-
Page 7: Installer Responsibility
Mount Series Installation Manual Installer Responsibility The installer is solely responsible for: Complying with all applicable local or national building codes, including any that may supersede this manual; Ensuring that Tamarack Solar and other products are appropriate for the particular installation and the installation environment;...