Related Manuals for Lincat Seal FDB4
Summary of Contents for Lincat Seal FDB4
- Page 1 User and Installation Instructions Seal Refrigerated Food Display and Preparation Bars FDB4, FDB5, FDB6, FDB8. FDB10, FPB5, FPB7 IS277 ECN 3850...
- Page 2 Used for the purposes for which it is intended, and with careful maintenance as outlined in this User Guide, your Lincat product will give years of trouble free use. IMPORTANT INFORMATION Please read all of the safety and operating instructions carefully before using this product.
-
Page 3: Table Of Contents
CONTENTS Contents Page Safety instructions………………………………………………………4 Product specification………………………………………………….. 5 Features………………………………………………………………….. 5 Technical specification…………………………………………………5 Pack contents…………………………………………………….………5 Spare parts list………………………………………………………….. 5 Installation……………………………………………………………….. 6 Connecting to the electricity supply……………………………. 6 Operating instructions………………………………………………….7 Defrosting…………………………………………………………. 7 Cleaning and maintenance……………………………………………. 7 Service information…………………………………………………….. 8 Conditions of guarantee…..…………………………………….…….. 8 USE OF THE FOOD DISPLAY BARS AND PREPARATION BARS The Food Display Bars and Preparation Bars are intended to be used on counter tops to display chilled food products placed in Gastronorm (GN) -
Page 4: Safety Instructions
Do not try to modify this product. Ensure that the electrical supply cable is not damaged. If the supply cable is damaged, it should be replaced by Lincat Ltd or suitably qualified persons, in order to avoid a hazard. IS277 ECN 3850... -
Page 5: Product Specification
PRODUCT SPECIFICATION Food Display Bar – FDB4, FDB5, FDB6, FDB8, FDB10 Food Preparation Bar – FPB5, FPB7 FEATURES Stainless steel body Electronic control Static refrigeration Manual defrost 230V, 50Hz, single phase TECHNICAL SPECIFICATION Model FDB4 FDB5 FDB6 FDB8 FDB10 FPB5 FPB7 GN container capacity (100mm... -
Page 6: Installation
INSTALLATION Ensure the unit is installed on a sound level surface and not in direct sunlight, damp or extreme temperature conditions. If the ambient (operating) air temperature exceeds the one shown in the Technical Specification (P.5), damage to the refrigeration system could occur. The feet must not be removed, as this will damage the supply cable and eventually the internal components. -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS Connect the unit to the electricity supply. Switch the unit on (green switch), insert empty Gastronorm 1. Temperature Display containers (100mm deep maximum) 2. On/Off Switch with lids and wait until the 3. Cable 4. Filter Position temperature display shows -2 C. -
Page 8: Service Information
Product code, type number and serial number of unit (both on serial plate) Code number of spare part (see spare parts list), if known Lincat reserve the right to carry out any work under warranty during normal working hours, i.e. Monday to Friday, 8.30 a.m. – 5.00 p.m.