K&H Total E-Call Instructions

Speaker
Jack
MULTI PLAY RPT MENU
Cutt
Yelp
Purr
Gobble
On / Off
i RMP 
Up
-
Left / Vol
Exit Menu
Down
II. Main Screen
A. Multi Play Mode - Displayed when the unit is in Multi-Play mode.
B. Play Mode - Displayed when the unit is in Single Play Mode, Also displayed along with
MULTI when in Multi-Play Mode.
C. Repeat Mode - Single or Multiple calls will be repeated.
D. Menu Mode - Displayed when the unit is in a main menu.
E. Play Window - Shows all current calls on card or in Multi-Play List.
F. Individual Volume - Allows each call in Multi-Play mode to have a separate volume.
G. Ramp Mode - When the Ramp mode is turned on the activated call will start 3 volume
levels below the currently selected play volume. This feature works in both single play
and multi-play mode. In multi-play mode, only the first call in the sequence will ramp up.
H. Volume Bar - Shows current volume on each call.
I. Remote Mode - Displayed when the unit has been configured for use with the optional remote.
J. Backlight - Displayed when the Backlight feature has been turned on.
III. Using your Total E-Call
Press and hold the On / Off button to turn the Total E-Call on. See Figure A.
All the calls on your cartridge will be listed in the Play Window. Use the Up or Down Arrow
Buttons to scroll through all the available calls.
Adjust the Volume Up or Down using the Vol - and Vol + Buttons. The Total E-Call is in
Single Call Mode as long as PLAY is the only option highlighted on the menu. To play a
single call, scroll Up or Down, Select the desired call and press the Thumb / Play Button on
the right side of the Total E-Call. The default configuration will play this call one time.
Your Total E-Call will power off after about 3 minutes of inactive use. You must push and
hold the On button to reactivate it. NOTE: This setting is disabled when the Remote
feature has been turned On.
The Total E-Call can quickly and easily be reset to factory settings. To do this, Power the
unit off, remove the call cartridge and depress the Reset Button.
Always power the Total E-Call off before inserting or removing call cartridges.
Total E-Call
I. Familiarization
Thumb Button
Play / Stop
Backlight
Right / Vol +
Menu / Select
Reset Button
Battery
Location
AAA X 3
Call Cartridge
Compartment
Instructions
Remote
Call Button
Play / Stop
A B C
MULTI PLAY RPT
Cutt
E
Yelp
Purr
Gobble
i RMP 
F G H
MULTI PLAY RPT
Call 1
Call 2
Call 3
Call 4
i RMP 
Figure A
MULTI PLAY RPT
Multi
Repeat
Remote
Ramp
i RMP 
Figure B
MULTI PLAY RPT
1
2
3
4

i RMP
Figure C
D
MENU
I J
MENU
MENU
OFF
OFF
OFF
OFF
MENU