Summary of Contents for MyEnergy Domain MyE Smart Home Gateway
- Page 1 MyE Home Energy Management System Manual Front view of the thermostat LCD Display...
- Page 2 Button Operations and Related LCD Display 1 – Communications button. it will toggle through the following control options: • Web server control and smart-grid control • Web server control and no smart-grid control • smart-grid control and no Web server control •...
- Page 3 • If Hold is “off”, then pressing HOLD/RUN when the thermostat is in its default mode will implement a set point Hold until you release it. • If Hold is “on”, then pressing HOLD/RUN will release the hold and return to the default weekly thermostat program.
- Page 4 14 – Lock icon: Indicates the lock status of the thermostat keypad. It can be locked/unlocked by key combination (Connection + Up + Down) or through the web interface. When it is on, the thermostat doesn’t respond to key pressing except for the key combination to unlock. 15 –...
- Page 5 • On means that the fan has been manually turned on and will run until turned to Auto or Smart mode. • Smart indicates that the Smart Fan mode is on. Smart mode is like an intermittent windshield wiper and will run intermittently based on our optimal control algorithm. 22 –...
-
Page 6: Thermostat Operation
27 – (No) Smart Grid: Indicates the status of the smart-grid connection and control. If smart-grid control is disabled (e.g., through the local control button), “No Smart Grid” will be lit. If smart-grid control is enabled, then “Smart Grid” will be lit If Smart Grid is available and enabled, and if there’s a DR event requiring a HOLD, then “Smart Grid”... - Page 7 • While a Temporary Hold is in effect, pressing the Up/Down buttons will change the hold temperature but keep the hold in Temporary mode. • Once in the Temporary Hold, press the Hold/Run will cancel it and resume the current program.
-
Page 8: Specifications
Supply RH,RC,C,W,W2/AUX,Y,Y2,G,O/B wire. • Wireless: ZIGBEE PRO • 2.4G IEEEE 802.15.4 Compliant RF • MAX Output power 4.5dBm • Compliance FCC CFR47 Part15 • RF Frequency Range 2394 -2507 MHz • Receiver Sensitivity -90dBm MyEnergy Domain, Inc. www.myenergydomain.com support@myenergydomain.com Made in China... -
Page 9: Fcc Note
FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the MyE Smart Home Gateway and is the answer not in the manual?
Questions and answers