Summary of Contents for Knightsbridge FLRxxP series
Page 1
INSTALLATION & MAINTENANCE MANUAL FLRxxP 230 V 50Hz...
Page 2
GENERAL INSTRUCTIONS These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: FLR10P/FLR20P/FLR30P/FLR50P SAFETY • Installation of this luminaire should only be carried out by a qualified electrician or competent person to the latest Building and current IEE Wiring Regulations (BS7671) •...
Page 3
Fig 1 • Feed the cable through the compression gland on the rear of the access plate. Ensuring correct pola • Feed the cable through the compression gland on the rear of the access plate. Ensuring correct observed, carefully wire as shown in Fig 2 polarity is observed, carefully wire as shown in Fig 3 Fig 3 •...
Page 4
WARNING This product must be disconnected from the circuit if it subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. GENERAL Ensure appropriate fixings are used for mounting surface. The product should be recycled in the correct manner when it reaches the end of its life. Check local authorities for where facilities exist.