SkyLink SD-001 User Manual

AUTO DIALER – MODEL SD-001 / SD-001R
1. Introduction
Congratulations on your purchase of the Auto Dialer Model SD-001R. The SD-001R
is an advanced emergency dialer which is connected to a phone line for assistance
to monitoring station during emergency thru 2-way voice conversation with Contact
ID compatibility.
Warning:
This system is designed to be installed and programmed by trained professionals.
DO NOT ATTEMPT TO MODIFY ANY SETTINGS BY YOURSELF.
The RS232 interface is used for update by maintainer. The NC/NO terminal is for the
maintainer to install the hardwired device for troubleshooting. No service parts for
the end customer.
.
Consult with your installer or dealer if you experience any problems with the system.
In this package, you should find the following:
․One Auto Dialer Model SD-001R
․One Telephone Cord
․One AC adapter
․One Rechargeable Battery for the Auto Dialer
․One User's Instructions
2. Main Unit
Following diagram shows several key features on the main unit.
Emergency Dialer
Speaker
LED Indication
CANCEL Button.
URGENT Button
Siren / Buzzer
Microphone
Front
URGENT Button – Press this button to activate the emergency call
CANCEL Button – Press this button to terminate or cancel the emergency call
LED Indication – Displays the status of the dialer
Speaker – Speaker for 2-way voice conversation
Microphone – Speak to this microphone during 2-way voice conversation
POWER
LINE
PHONE
Back
On / Off – Turn the dialer On / Off
Power – Connect AC adapter for power
Line – Connect telephone line
Phone – Connect a telephone to share the same phone line
NC/NO - The NC/NO terminal is for the maintainer to install the hardwired device for
troubleshooting.
Warning:
DO NOT TURN OFF THE MAIN UNIT. IT SHOULD ALWAYS BE ON OTHERWISE
IT WILL NOT FUNCTION DURING ANY EMERGENCY SITUATION. DO NOT
DISCONNECT ANY OF THE PHONE LINE OR POWER ADAPTER. IF YOU SEE