Summary of Contents for TE 4020
- Page 1 OPERATION MANUAL MODEL 4020 & 4030 ACCELEROMETER TE CONNECTIVITY SENSORS///MODEL 4020 & 4030 ACCELEROMETER 05/2016 Page 1...
-
Page 2: Warranty
(Germany), COFRAC (France) traceable calibration services on sensitivity at 100 Hz (102 or 120 Hz in Europe) and full frequency sweeps are offered. Contact the regional headquarters for pricing information. TE CONNECTIVITY SENSORS/// MODEL 4020 & 4030 ACCELEROMETER 05/2016 Page 2... -
Page 3: Installation
DESCRIPTION The Model 4020 & 4030 are low noise, signal conditioned DC accelerometers packaged in a durable molded housing with an integral cable assembly. The accelerometers are offered in ±2g & ±6g ranges with a nominal 0-200Hz bandwidth and an operating temperature range of - 40°C to +85°C. - Page 4 A 2.5Vdc bias will be present on the output leads and the output of the accelerometer will be 0.5-4.5V full scale. The accelerometer should be connected to the interface circuitry as detailed below. Biaxial model 4020 wiring diagram Triaxial model 4030 wiring diagram TE CONNECTIVITY SENSORS/// MODEL 4020 & 4030 ACCELEROMETER 05/2016 Page 4...
-
Page 5: Cable Routing
CABLE ROUTING The model 4020 & 4030 accelerometers incorporate a PVC jacketed cable with an integral shield. The cable assembly should be properly secured at regular intervals during testing. It is recommended to use clamps, wax, or tape to secure the cable to minimize cable motion that can add noise to the output signal. -
Page 6: Frequency Response Curves
TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product.