Advertisement
Quick Links
INSTALLATION AND OPERATION MANUAL
FLOOR
JACKS
(Professional &
Speedy Series)
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes
to the purchaser upon receipt from the carri-
er. Consequently, claims for the material
damaged in shipment must be made by the
purchaser against the transportation compa-
ny at the time the shipment is received.
RFJ-3T
RFJ-3TP
Bend - Pak Inc.
1645 Lemonwood Drive
Santa Paula, CA 93060, U.S.A
Tel: 805 933 9970 - Fax: 805 933 9160
"The Benchmark Of Quality"
Forward this manual to all operators.
Failure to operate this equipment as
directed may cause injury and/or
RFJ-3TQ
BE SAFE
Your new ranger floor jacks are designed and
built with safety in mind. However, your over-
all safety can be increased by proper training
and thoughtful operation on the part of the
operator. DO NOT operate or repair this
equipment without reading this manual and
the important safety instructions shown
inside.
property damage.
MODELS
RFJ-3T
RFJ-214TP
RFJ-3TP
RFJ-214TQ
RFJ-3TQ
Advertisement
Related Manuals for Ranger RFJ-3T
Summary of Contents for Ranger RFJ-3T
- Page 1 SHIPPING DAMAGE CLAIMS BE SAFE When this equipment is shipped, title passes Your new ranger floor jacks are designed and to the purchaser upon receipt from the carri- built with safety in mind. However, your over- er. Consequently, claims for the material...
- Page 2 Lifting Lowered raised Front Rear Overall Shipping Capacity Height Height Overall Overall Length Weight Width Width RFJ-3T 6,000 lbs. 5 3/4" 21 1/2" 11" 15 1/2" 28" 110 lbs. 2,722 Kg 121mm 521mm 297mm 368mm 711mm 50Kg RFJ-214TP 4,500 lbs.
- Page 3 ASSEMBLY INSTRUCTION This equipment comes to you pre-assembled except for the pump handle and the foot paddle. (foot paddle for models RFJ-214TQ / RFJ-3TQ) All models: The two sections of the handle should be assembled by sliding the lower part of the handle into the top part and affixing the screw through both parts.