Simplicity 1692210 Installation Instructions

INSTALLATION
INSTRUCTIONS
A
WARNING
Turn off the engine, let the rotor come to a
complete stop and disconnect the spark plug
wire before assembling the vacuum kit or
changing attachments.
Never remove% adapter from the back of the
machine while the machine is running or the
rotor is turning. The rotor is pinning just inch-
es away from the adapter iniet. Serious injury
will result if you put your fingers or foot in the
adapter inlet while the rotor is turning!
INSTALLATION
1. Remove the rotor housing cover. Retain the screws.
2. Replace the cover with the adapter (1A or 1 B) using
the screws removed in step 1 and washers (15).
Insert the coupler into the adapter hy aligning the
Ref. Qty. Part No.
1 1021100
1 1713522
2 1 1023100
3 1 1025100
4 1 1035100
5 1 1027100
6 1 1030100
7 1 1024100
8 1 1960294
9 1 1921319
IO 1 6041612
1 1 1 1026100
12 1028100
13 1 5001612
14 1
1
1
15 3 1919326
Lid color depends on which kit you've ordered. Only
l
one lid is packaged per kit.
Figure 1. Kit Parts
Description
Adapter
Adapter (European Model)
Coupler
Plug
Hose, 10' x 4" Dia.
Leaf Tray
Nozzle
Ring
Nut, Hex, Flange, l/4-20
Washer, l/4
Screw, Phillups Hd.
Handle
Grip, Handle
Decal, Danger
Hopper Lid (Orange)
Hopper Lid (Gold)
Hopper Lid (Red)
CHIPPER/SHREDDER VACUUM KIT
Mfg. Nos. 1692210, 1692231, 1692353,900OlOO
Never operate the machine without the cou
assembly or plug connected to the
arrows (or seams) running along the top of the cou-
pler with those on the adapter. Push fully in and turn
until it snaps into place.
NOTE:
Insert plug (3) into adapter when vacuum
attachment is not in use. See Removing the
Vacuum Kit on the next page.
4. Slip the grip (12) onto the handle (11). Putting some
soap on the handle will make the grip slide on easi-
er.
5. Connect the handle to the nozzle (6) using the
screw (lo), washers (9) and nut (8).
6. Connect nozzle (6) or leaf tray (5) to the hose,.
7. Securely place hopper lid (14) on hopper.
FORM - 1709566
PRINTED IN U.S.A.