EN
V4, V41, V5, V53, V55, V56, V57, V6, C4, C41, C5 certified according to EN 361 and EN 358
C4 / C41
* C4 – Without positioning lanyard
C41 – With integrated positioning lanyard
V53
Thank you for choosing a VERTIQUAL® harness! You have purchased a high quality product that will reliably protect you and will be your companion for a long time
when working at heights and depths.
This manual must be read and understood before using the product! This product will be used with other equipment (components) thus forming a system for working at
heights. Please refer to the instruction manual of each component in your system for compatibility and correct use! Following these instructions accordingly is essential
for your safety. Failure to do so can result in serious or even fatal accidents! Keep these instructions together with the product, accessible to all users, so they can consult
them whenever is needed!
WARNING!
These instructions are a basic comprehensive guide to the safe use of the purchased equipment. They contain general information about the product, intended to help
the user, but cannot cover all the situations that may occur in the daily activities and cannot in any case replace the specialized training courses for safety at heights. This
PPE against falls from heights can only be used by well-trained users, who are familiar with the relevant legislation and who have successfully completed a special safety
training course for working at heights.
Instruction manual for Combined-Full Body Harnesses
V4 / V41
* V4 – Without positioning lanyard
V41 – With integrated positioning lanyard
V55
C5
V56
V5
V57
Edition: 20.02.2019
V6