Advertisement
Quick Links
Installation and Operation Manual
For Models ER8200C, ER16200C and ER24200C
Read all safety instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Refer all servicing to qualified service personnel.
Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves or other appara-
tus that produce heat.
Reduce risk of fire or electrical shock. Do not expose this product
This installation should be made by a qualified service person and
NITEK
681200160
IMPORTANT SAFETY INSTRUCTIONS
to rain or moisture.
conform with local codes.
Patent Pending USA and Europe
Euro Pat App 2779641
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
®
E-mail: info@nitek.net
WWW.NITEK.NET
De Aar 99
8253 PN Dronten
The Netherlands
Tel: +31(0) 321 310 043
E-mail: info@nitekeurope.net
WWW.NITEK.NET
11152016
Advertisement
Related Manuals for Nitek EtherStretch Lyte ER8200C
Summary of Contents for Nitek EtherStretch Lyte ER8200C
- Page 1 Euro Pat App 2779641 NITEK 681200160 11152016 5410 Newport Drive, # 24 De Aar 99 8253 PN Dronten Rolling Meadows, IL 60008 The Netherlands Phone: (847) 259-8900 Tel: +31(0) 321 310 043 Fax: (847) 259-1300 ® E-mail: info@nitekeurope.net E-mail: info@nitek.net WWW.NITEK.NET WWW.NITEK.NET...
- Page 2 “ON” the matching Power Selection DIP switch for a port. On the transmitter the POE Out jumper must be in the “OFF” position. When the DIP switch is turned “ON” power is sent to the transmitter and an LED below the BNC port will light. FRONT VIEW NITEK POWER ® ETHERSTRETCH LYTE...
- Page 3 Network Switch, NVR or Server Front and back of same unit NITEK ® POWER ETHERSTRETCH LYTE PORTS 1-24 Coax Activity: Green (right) Model ER24200C RECEIVER Power Out: Orange (left) 115 / 230 VAC RoHS Power Selection 3/1.5 A C O M P L I A N T...
- Page 4 4) Check the green LED on the receiver network port. It should be “Flashing” when data is flowing over that port. This shows you have a transmitter and camera are connected and data is moving over the port. Nitek Technical Support is (800)528-4343 or 847-259-8900. International calls 001-847-259-8900...