Download Print this page

Vision ZL 7261 CN-5 Operation Manual

Z-wave power monitor. z-wave on/off module

Advertisement

Quick Links

Federal Communications Commission Statement
This equipment has been followed to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try and correct the
interferene by one of the following measures:
Reorient or relocate the receiving antenna,
Increase the separation between the equipment and receiver,
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undersired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
Limited Warranty
Vision Guarantees that every wireless lighting module is free from physical defects
in material and workmanship under normal use for one year from the date of
purchase. If the product proves defective during this one-year warranty period,
Vision will replace it free of charge. Vision does not issue any refunds. This warranty
is extended to the original end user purchase only and is not transferable. This
warranty does not apply to: (1) damage to units caused by accident, dropping or
abuse in handling, or any negligent use; (2) units which have been subject to
unauthorized repair, taken apart, or otherwise modified; (3) units not used in
accordance with instruction; (4) damages exceeding the cost of the product; (5)
transit damage, initial installation costs, removal cost, or reinstallation cost.
For information on addional devices, plesae visit us at www.visionsecurity.com.tw
ZL 7261/7201
V3
1031007
-5-
6B1Z-72003
Operation Manual
ZL 7261 CL-5
ZL 7261 CN-5
ZL 7261 DE-5
ZL 7261 FR-5
ZL 7261 IT-5
ZL 7261 JP-5
ZL 7261 KR-5
ZL 7261 RU-5
ZL 7261 US-5
Z-Wave Power Monitor
ZL 7201 CL-5
ZL 7201 CN-5
ZL 7201 DE-5
ZL 7201 FR-5
ZL 7201 IT-5
ZL 7201 JP-5
ZL 7201 KR-5
ZL 7201 RU-5
ZL 7201 US-5
Z-Wave On/Off Module

Advertisement

loading

Summary of Contents for Vision ZL 7261 CN-5

  • Page 1 If the product proves defective during this one-year warranty period, Z-Wave Power Monitor Vision will replace it free of charge. Vision does not issue any refunds. This warranty is extended to the original end user purchase only and is not transferable. This...
  • Page 2 Introduction 220V15A/3200W (Resistive) Type E, F & L: 230V/10A/2300W (Resistive) Thanks for choosing the Vision’s Power Monitor or On/Off Module of the home automation device. This Power Monitor or On/Off Module is a Z-Wave enabled device (interoperable, two-way RF mesh networking technology) and is fully compatible with any Z-Wave enabled network.
  • Page 3 LED visual indication: 11. Support OTA (Over-the Air) Firmware update from controller. Please refer to your controller manual. Once OTA function success, please make sure to exclude the device Excluded Red and Green LED flashing separately & include again before using the device. Included Switch ON Red, Switch Off Green ZL7201 only...

This manual is also suitable for:

Zl 7261 fr-5Zl 7261 de-5Zl 7261 cl-5Zl 7261 jp-5Zl 7261 kr-5Zl 7261 it-5 ... Show all