Advertisement
Quick Links
Owner's Manual
Freedom One Sit-to-Stand (S2S) Workstation
For Sprout 1.55 by HP
55368-Q45
55368-Q46
Important
Before using this product:
• Read this manual
• Comply with all safety and operating instructions
• Ensure all parts and correct quantities are included
Any parts damaged during shipment must be reported
within 5 days of receipt. To report information regarding
missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
Thank you for purchasing Spectrum products!
Spectrum Industries, Inc
925 First Avenue, Chippewa Falls, WI 54729 USA
800 235 1262
715 723 6750
www.spectrumfurniture.com
®
, and Sprout Pro G2
0190103R2 Page 1 of 8
Advertisement
Related Manuals for Spectrum 55368-Q45
Summary of Contents for Spectrum 55368-Q45
- Page 1 5 days of receipt. To report information regarding missing parts or damage, to purchase parts or acces- sories, or if you have any questions, please contact us. Thank you for purchasing Spectrum products! Spectrum Industries, Inc 925 First Avenue, Chippewa Falls, WI 54729 USA...
-
Page 2: Important Safety Instructions
Do not use attachments not recommended by the heated surfaces. manufacturer. 12. If servicing is necessary, please contact Spectrum for assistance. 16. This unit does not have any user-serviceable parts. If servicing is 13. Damaged electrical components can create signifi cant hazards to necessary, please contact Spectrum Industries for assistance. - Page 3 Hardware (1) 0103500 (4) 0114470 2.5” Plug 3/8-16 x 5/8” Bell glide See separate instructions for installation instructions (1) 0131416 (4) 0102297 Silver rear security bracket 7mm x 30mm JCWS (Designed exclusively for Sprout 1.55 by HP) (1) 0132920 (2) 026059 Black rear security bracket 1/4”...
-
Page 4: Assembly & Set-Up
Assembly / Setup 1. Install security brackets 4mm Hex wrench (included) 1. With the Sprout on worksurface, choose one rear security bracket. HP Sprout (Bracket for Sprout 1.55, or Sprout Pro G2). computer 2. Install the rear security bracket with (2) 7mm JCWS. Figure 1. Be sure bracket is snug up against Sprout before tightening. - Page 5 Note: The cord reel is intended to provide temporary installed. It can can be mounted on the left or right-side of access to electrical outlets for Spectrum mobile lec- the workstation. Figure 3A. terns. Check local electrical codes prior to use.
- Page 6 Switching cord reel position Phillips Pliers screwdriver (1) 0114320 Cord reel with 15’ cord (1) 0115882 (1) Connector pin Universal mount- ing bracket Left Right (1) 0131142 (3) 026064 Adapter 1/4-20 x 5/8” PHMS Figure 3A 1. Remove the (2) 1/4-20 x 5/8” PHM screws, and (1) 1/4-20 x 15mm JC bolt under the cord reel.
- Page 7 Casters / Glides Note: The Freedom One Lectern comes with factory-installed 11/16” wrench casters. If a more permanent non-moving lectern is needed, the (for casters) casters can easily be replaced with the included glides. Figure 4A. 1/2” wrench (for glides) 1.
-
Page 8: Warranty
P.A.C.E. program (Product Assurance to meet Customer Expectations). We expressly warrant that Spectrum products will be of good quality and workmanship and free from defect for the period set out in the warranty table below from the date of delivery.