Nitek EL1500C Installation And Operation

Model EL1500C
Includes one ER1500C Receiver
and one ET1543C Transmitter
Reduce risk of fire or electrical shock. Do not
expose this product to rain or moisture.
Introduction
The EL1500 is a system for extending Ethernet & PoE. The EL1500 can be used on new or existing cable and is
designed to greatly extend the distances to which IP cameras and network devices can operate. In addition to network
communication the EL1500 is ideal for PoE applications. It allows all power to flow from the head end for most camera
applications. In unique cases where high power PoE is needed it can inject up to 25 watts of power at the transmitter
end.
TYPE 1 Installation
EL1500 with a PoE Source Switch and IP Cameras
One common installation involves using the ER1500 Receiver to power both the remote transmitter and PoE camera.
The ER1500 can be powered by a PoE switch. Refer to the diagram below when installing. Refer to the PoE power chart
below to determine maximum range for a PoE camera.
PoE Device Power
RG59 Coax with
20AWG Center*
Distance Power at PoE Port
328ft/100m
656ft/200m
984ft/300m
1312ft/400m
1640ft/500m
*
Results with 48VDC power to the
Receiver optional Power Port and
using RG59 SBC Type Cable
Patent Pending USA and Europe
Euro Pat App 2779641
NITEK
681200111
(for use with Coaxial cable)
15.4 watts
13.0 watts
11.3 watts
9.3 watts
8.0 watts
®
Note: This installation should be made by a
qualified service person and conform with local
codes.
Connector LED
Power
Network
Port
Link Status
PoE Out
Link
Port
10/100
IEC/UL 60950-1
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
E-mail: info@nitek.net
WWW.NITEK.NET
Installation and
Operation Manual
LED INDICATORS
OFF ON
Power
No power
Good
No Ethernet Ethernet Link
Link Good
No PoE PoE Power
Power Out Good
No Link 100Mb
De Aar 99
8253 PN Dronten
The Netherlands
Tel: +31(0) 321 310 043
E-mail: info@nitekeurope.net
WWW.NITEK.NET
FLASHING
10Mb
09292016