COMPRESSED AIR SOLUTIONS MODELS OS300 THRU OS2501 TABLE OF CONTENTS PAGE INTRODUCTION ABBREVIATED WARRANTY OIL/WATER SEPARATOR NOMENCLATURE RECEIVING AND INSPECTION SAFETY AND OPERATION PRECAUTIONS PRINCIPLES OF OPERATION INSTALLATION AND INITIAL START-UP SCHEDULED MAINTENANCE PARTS LIST ZEKS Compressed Air Solutions 1302 Goshen Parkway...
2. ABBREVIATED WARRANTY ZEKS OS Series Oil/Water Separators are warranted to be free from defects in material and workmanship for a period of 12 months from date of start-up but not to exceed 18 months from date of shipment from the factory.
“Danger,” “Warning,” or “Caution.” The user of any Oil Water Separator sold by ZEKS Compressed Air Solutions, is hereby warned that failure to follow the above Safety and Operation Precautions may result in personal injury or equip- ment or environmental damage. However, ZEKS Compressed Air Solutions does not state as fact, nor does it mean to imply, that the preceding list of Safety and Operating Precautions is all inclusive, and further, that the observance of this list will prevent all personal injury or equipment damage.
WARNING Normal lifting precautions need to be observed when servicing the ZEKS OS Series Oil/Water Separators. Failure to observe lifting precautions may result in personal injury. Elements will be sat- urated with oil and condensate and therefore will be heavy. Protective clothing and gloves should always be worn when servicing the units.
During initial filling, dust may rise from the carbon elements; this is only displaced air and is entirely harmless. ZEKS recommends that carbon elements should be pre- soaked for 24 hrs. Any carbon dust in the outlet water is harmless. Replace the foam depressurization pad.
This manual is also suitable for:
Os300pgOs1251pgOs1251Os751pgOs751Os2501pg...
Show all