Ultrak KL2814DS Installation Instructions

PLACEMENT OF LENS ON CAMERA
To attach the lens to the lens mount, turn the lens clock-
wise on the lens mount until it reaches the end of the
threads. At this point, you can turn the lens and lens mount
assembly on the camera by turning the assembly counter-
clockwise and clockwise. Now you can easily adjust the
camera back-focus and the lens fixing position.
As indicated in Figure 2, when placing lens on the camera,
part of the Galvanometric meter must be positioned on the
left side when facing the front of the camera. When you
take the lens off the camera, turn counter-clockwise.
FIGURE 2
The lens is a precision product. In case of breakdown,
please get in touch with your dealer or place of purchase.
We guarantee this product through one year after date of
purchase.
NOTE: We are not responsible for malfunctions due to
customer modification or mishandling of product.
NOTE: Specifications subject to change without notice.
MONO-FOCAL
& VARI-FOCAL
GALVANOMETRIC
AUTO-IRIS LENSES
(DC-TYPE)
INSTALLATION
INSTRUCTIONS
Ultrak Worldwide Support Center & Eastern Regional Office:
1301 Waters Ridge Drive Lewisville, TX 75057
(800) 796-2288 (972) 353-6400 FAX (972) 353-6670
Ultrak Western Regional Office:
6252 West 91st Avenue Westminster, CO 80030
(800) 846-8884 (303) 428-9480 FAX (303) 429-6609
FORM 1549, REV. 03/97
CCTV LENS
CE