X-over point, it's very good for near field performance.MUSE series can output a very deep and warm low frequency when install close to the wall,becauseof special designed of the vent in cabinet.
INSTALLATION MUSE15 MUSE Wiring: AES Power: 250W Impedance: 8 ohms Dirctivity: ±2,Full range/INPUT ° 90 x60 ±1, Sub/LINK NL4 Speakon plug SUB Wiring: SUB215 AES Power: 800W Impedauce: ±1,Full range/INPUT 4 ohms ±2, Sub/LINK NL4 Speakon plug When sub-woofer is in the same place with MUSE, we suggest to use 4 wires, can save time and cable.
INSTALLATION Hanging: MUSE series loudspeaker has M8 flying points, you need to remove the screws of the flying points when need to hang the loudspeaker. M8x30 And must check if all the screws are screw in to the flying points after installation, if not it may cause air leakage and make sound worse.
Page 5
INSTALLATION Fuse& Adjust the angle Install loudspeaker with bracket: Choose the right flying points and install with bracket*. There is no bracket in the package, please purchase by yourself. To achieve the best low frequency response, should assemble the cabinet close to the corner. The back hole of the cabinet should be keep 20-30cm from the wall.
Page 6
Verity Audio reserves the right to make any changes to the product specifications without prior notice. Final specifications to be found in the user manual.