PARTS AND DESCRIPTIONS Operating instructions Handset with display, LED and button (T) Winder handle (on both sides) Accessories (optional) Pressure screw (S) Indicator peg Hose drum FUNCTION AND APPLICATIONS The niv±comp device consists of a hose drum with pull-out winder handles, a spe- cial hose and handset.
DISPLAY WHEN OPERATING Press button to switch device on Reference level not yet stable Reference level is stable, press button to save reference level (Dis- play Level = reference level. Values such as show devia- tion from reference level in millimetres or inches. Saving new reference level: Press button until display shows .
INSTRUCTIONS FOR MAKING EXACT MEASUREMENTS The following guidelines are important for levelling and making measurements us- ing niv±comp. It is also important to handle the device carefully and to be aware of any possible sources of error. INDOORS CLOUDY WINDY SUNNY Outside building...
It is useful to use some kind of position marker (nail) if one particular ref- erence level is required often. The device should be opened and the hose unwound and left for a few minutes to reach the right temperature if the temperature has changed significantly (e.g.
SETTINGS AND SPECIAL DISPLAYS It is possible to make corrections to height calibration and to personalise the set- tings for the display of measured values using niv±comp. You can call the menu up by keeping the button pressed down when switching the device on until is displayed.
TIPS FOR CARE AND MAINTENANCE Always store niv±comp in a dry place and keep it clean to make sure it stays in good condition for a long time. Wax-free and solvent-free cleaning products only may be used (washing liquid). The device is best protected from damage when al- ways packed away after use.
Damage to the hose system: The hose is thick and robust so slight damage to the outer skin is not critical. The hose and hose system can withstand great strain. However, repair will be required if there is a leak of fluid. Clean the fluid (non-toxic / neutral / oily) up us- ing suitable means and dispose of in accordance with the regulations on waste oil.