Contec BRK-VL01-100 User Manual

VESA Bracket for Flex Net Viewer
(75mm x 75mm, 100mm x 100mm)
BRK-VL01-75, BRK-VL01-100
Thank you for purchasing this product. This is a metal fitting to fix CONTEC FlexNetViewer.
Using this metal fitting, you can fix the FlexNetViewer anywhere you like with some screws.
Product Configuration
This product is configured as follows. Be sure you have received all of the components listed.If any
components are missing or broken, contact the store where you purchased this product.
Your registration card is essential for us to notify our customers of new products. Be sure to fill it out
completely and return it.
- Bracket (BRK-VL01-75 or BRK-VL01-100)...1 - User's Guide (this document)...1
- M4 x 8 sems screw...4
- M3 x 5 flat-head screw (BRK-VL01-100 only)...4
Using Method
1. Fix the FlexNetViewer to this product using the M3 x 6 sems screws or M3 x 5 flat-head
screws that came with this product.
However if this is BRK-VL01-75, fix it first to the LCD monitor and then secure the
FlexNetViewer.
2. Secure the assembled product to the LCD monitor by screwing the attached M4 x 8 sems screws
into the holes at the four corners of this product.
Please refer to the manual of the FlexNetViewer product for how to secure the LCD monitor.
Figure 1. Using Method (BRK-VL01-75)
1
User's Guide
CONTEC CO.,LTD.
- M3 x 6 sems screw(BRK-VL01-75 only)...4
Figure 2. Using Method (BRK-VL01-100)
BRK-VL01-75, BRK-VL01-100