Vetra MegaTouch USB-802 Series Instructions For Use

Keyboard, Mouse, USB Touch Screen, and DVI Video Switch
Congratulations on your purchase of a VETRA MegaTouch™ USB Touch Screen switch! This quality product is
designed and built in the USA and is backed by a VETRA Three-year Warranty and unlimited free technical support. You
are welcome to comment; please email us at sales@vetra.com or call us at the numbers given at the end .
INTRODUCTION
The USB-802 "MegaTouch"
Switches switching USB or serial touch screens and DVI video monitors between two PCs. On models that have more
than one input, an USB keyboard can be connected for hot-key selection of PC channel.
All models come with the VIP-210 power supply.
The "MegaTouch" system consists of the following components:
1. One - Switch Unit;
2. One – Power Supply.
Note: The "MegaTouch does not come with USB, Serial, or DVI Video extension cables. They may be ordered from
Vetra separately.
INSTALLATION
Before connecting PC's to the Switch, make sure that the Switch is powered by its Power Supply!
The PC's may be powered or not when you connect them to the Switch.
Keyboard, mouse, touch screen, and video monitor may be connected to the Switch at any time.
Do not power down the Switch while any PC is connected to the Switch!
There are two main steps to connect the Switch after it has been powered: 1) connect PC's, and 2) connect Workstation:
1. Connect PC's to Switch unit:
USB
Connect any available USB input on the PC's to the Switch using USB A-B cables. Connect PC #1's USB port to the
backpanel connector of the Switch marked "PC1". Connect PC's #2 USB port to the back panel connector of the Switch
marked "PC2". It is not necessary to have both PC's connected for the Switch to operate.
Video
Connect the DVI Video outputs of the PC's to the Switch using DVI-D male/male extension cables. Connect PC #1's video
output to the backpanel connector of the Switch marked "PC1 VIDEO". Connect PC's #2 video output to the back panel
connector of the Switch marked "PC2 VIDEO".
Connect PC #1 ' s Monitor A video output to the back panel connector of the Switch marked " PC1 VIDEO A " and connect
PC#1 ' s Monitor B video output to the back panel connector of the Switch marked " PC1 VIDEO B " . Repeat for PC #2.
User Instructions for
The USB- 802 Series "MegaTouch"™
™
Keyboard, Mouse, Touch Screen, and DVI Video Switches are full function, Integrated
For the D2 series (Dual-Head) MegaTouch:
275 MARCUS BLVD, Suite J, HAUPPAUGE, NY 11788 USA
Tel: 631-434-3185 Fax: 631-434-3516
www.vetra.com email: sales@vetra.com