Advertisement
Quick Links
(2 foot Versions)
LPM3C4D2P
LPM3C4B2D
These instructions contain important safety information, read and
follow them carefully. Dialight will not accept any responsibility for
injury, damage or loss which may occur due to incorrect installation,
operation or maintenance
1: Introduction
This Linear LED light is designed for illumination of industrial locations. It uses the latest in solid state
lighting technology for long life, low maintenance, and high efficiency.
The unique optical design focuses light downward to where it is needed, giving improved efficiency over
a conventional HID luminaire.
An internal, universal input, power-factor-corrected switch-mode supply allows it to be used from any
nominal 100V-277V, 50/60Hz AC supply without any variation in light output.
Models listed above are SUITABLE FOR WET LOCATIONS in unclassified locations:
Temperature Code: T5 for 2' model, T5 for 4' model
Note: Save these instructions for future reference.
INSTALLATION AND MAINTENANCE MANUAL
MODELS
Ambient Temperature Range: -40C to +65C
®
DUROSITE
LED LINEAR FIXTURE
Document No: 9100-127-2209-99 Rev A
(4 foot Versions)
LPM3C4M2P
LPM3C4H2D
April, 2014
Advertisement
Related Manuals for Dialight DUROSITE LPM3C4D2P
Summary of Contents for Dialight DUROSITE LPM3C4D2P
- Page 1 LPM3C4M2P LPM3C4B2D LPM3C4H2D These instructions contain important safety information, read and follow them carefully. Dialight will not accept any responsibility for injury, damage or loss which may occur due to incorrect installation, operation or maintenance 1: Introduction This Linear LED light is designed for illumination of industrial locations. It uses the latest in solid state lighting technology for long life, low maintenance, and high efficiency.
-
Page 2: Installation
The technical data indicated on the Luminaire are to be observed. • Changes to the design and modifications of the Luminaire are not permitted • Only genuine Dialight replacement parts are to be used when unforeseen maintenance is required. Consult factory at www.Dialight.com or authorized representative as required. - Page 3 Restore power and verify operation. Figure 2. TWO 3/4 NPT PORTS AT EACH END JUNCTION BOX COVER WITH CAPTIVE SCREWS AT EACH END Page 3 of 6 1501 Route 34 South, Farmingdale, NJ 07727 Tel: (732) 919-3119 Fax: (732) 751-5778 www.dialight.com...
-
Page 4: Maintenance
5) NOTE: Screws, other than the Junction Box area, are factory torqued and should not be tampered with during installation or maintenance. Figure 4. Polycarbonate Lenses Page 4 of 6 1501 Route 34 South, Farmingdale, NJ 07727 Tel: (732) 919-3119 Fax: (732) 751-5778 www.dialight.com... -
Page 5: Specifications
All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed. In accordance with Dialight Corporation “Terms and Conditions of Sale”, and since conditions of use are... - Page 6 Document No: 9100-127-2209-99 Rev A REV. ECO No. DATE 17702 4/29/14 Page 6 of 6 1501 Route 34 South, Farmingdale, NJ 07727 Tel: (732) 919-3119 Fax: (732) 751-5778 www.dialight.com...