Merlin E940M Manual

+
For use with Security 2.0 Garage Door Openers. The code between the
the remote control and the receiver changes with each use, randomly
accessing over a billion new codes. Refer to your product manual for the
location of the learn button.
NOTE: Your product may look
in this manual.
Single Button Remote Control
Model E940M
LED
3-Button Remote Control
Model E943M
LED
To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:
• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote controls.
•
Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel.
•
ALWAYS keep gate or garage door in sight until completey closed. NEVER permit anyone to cross path of moving gate or door.

PROGRAM USING THE GARAGE DOOR OPENER

TO ERASE ALL CODES FROM MEMORY

When deactivating any unwanted remote
control code, all previous codes will be
erased.
than the products illustrated
3- Button Mini Remote Control
LED
Model E945M
4-Button Remote Control
Model E950M
Press and hold the button on
the remote control or wireless
wall control you wish to use. The
Locate
the learn
button.
MODELS E940M , E943M, E945M, E950M, E128M & E138M
LED
LED
Wireless Wall Control
Wireless Wall Control
Model E138M
Model E128M
LED indicator on
the transmitter
continuously
(except E945M).
TRANSMITTERS & WIRELESS WALL CONTROL
ROLLER DOOR SECTIONAL DOOR
OPENER OPENER
LEARN
BUTTON
LEARN
BUTTON
LED
INDICATOR
4
Press and
immediately release
the Learn button.
Press and hold the Learn button on garage door opener
until the learn LED goes out (approximately 6 seconds).
All previous codes are now erased. Reprogram each
remote control you wish to use.
LED
INDICATOR
The opener
or 2 clicks are
heard when
it has learnt
the code.