Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-0410, 7160-0412, 7170-0165, 7170-0166
FORD NGPI CONSOLE SEDAN & UTILITY, 2012+
NOTE: ARMREST AND
CUP HOLDER SHOWN
FOR REF. ONLY
Top Plate
Center Brace
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© copyright 2016 Gamber-Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
USB/Audio
RELOCATION
Revision
Rev.M
Printing Spec: PS-001
Top Plate
Center Brace
12v Knockouts
12v Knockouts
Note:
If there is no factory front console plate
(Top Plate) installed, use hardware bag
7120-0630(included) for required hardware
Distributed By:
Form
INST-568
1/3
Advertisement
Summary of Contents for Gamber Johnson 7160-0410
- Page 1 INSTALLATION INSTRUCTIONS Product Revision Form INST-568 7160-0410, 7160-0412, 7170-0165, 7170-0166 Rev.M FORD NGPI CONSOLE SEDAN & UTILITY, 2012+ Printing Spec: PS-001 Top Plate Center Brace NOTE: ARMREST AND CUP HOLDER SHOWN FOR REF. ONLY USB/Audio RELOCATION Top Plate 12v Knockouts...
- Page 2 Sedan: 1. Remove the stock tunnel plate by removing the 6 bolts. 2. The harness on the right side of the YAW sensor (located on the transmission tunnel) may impede box installation. For ease of installation, pull up on harness to disconnect the push fastener attaching the harness to the transmission tunnel.
- Page 3 The cup holder (MCS-INTCUP) can be placed anywhere along the horizontal length of the box. Note: The cup holder is not included with 7160-0410 or 7160-0412 but can be ordered separetly. The Top Plate and Center Brace on both console boxes are designed to be removable to aid in installation and cable routing.