Summary of Contents for Nortech N301BCATEX
- Page 1 HAZARDOUS LOCATION PNEUMATIC VACUUMS ATEX Certified For Hazardous Locations INCLUDES MODELS: N301BCATEX, N301BCXATEX, N301DCATEX, N551BCATEX, N551BCXATEX, N551DCATEX, N552BCATEX, N552BCXATEX O P E R A T I N G M A N U A L...
-
Page 2: Atex Certification
However, Europe has such standards and they are known as ATEX Directives. NORTECH engaged SIRA Test & Certification, Ltd, a United Kingtom-based, nationally recognized testing laboratory, to certify that the above NORTECH Hazardous Location Pneumatic Vacuums meet the applicable ATEX Directives. -
Page 3: Safety Features
COMPRESSED AIR SUPPLY Adequate compressed air supply is essential to the proper perfor- NORTECH Hazardous Location Pneumatic Vacuums are designed mance of your NORTECH vacuum. Compressed air requirements to eliminate and dissipate the buildup of static charges. The fol- are as follows:... - Page 4 GROUNDING THE VACUUM In order to operate safely in approved hazardous locations, the vacuum must be properly grounded during operation. Proper grounding can be achieved in one of three ways: Option Three is to operate the vacuum on an electrically grounded surface.
-
Page 5: Setup And Operation
SET-UP AND OPERATION Prior to operating the vacuum, inspect the unit and replace worn or broken components. Use only original NORTECH equipment as replacement parts. Make sure the ball valve on the vacuum is turned off. Inspect the bottom side of the vacuum head cover to ensure the filter and/or liquid shut-off valve is securely in place by use of the 3 supplied springs. -
Page 6: Maintenance
MAINTENANCE Check the internal filter periodically. Ensuring maximum perfor- Damaged, ripped, or torn filters should be replaced immediately. mance means cleaning the filter when it becomes dirty and/ Over time, even filters that have been cleaned regularly loose their or clogged. To clean the filter, detach the filter from the cover by effectiveness as the pores in the filter media fills up. - Page 7 Replace the cover gasket should it become worn, frayed, or ineffective. Replacement filters, foam inserts, and cover gaskets are available directly from NORTECH. WET VACUUM OPTION To convert from a dry vac to a wet vac, remove filter and replace...
-
Page 8: Two Year Limited Warranty
NORTECH; or any product not installed, used, or prior to any repairs or alteration to the product. Until the claim is...