Page 1
MOUNTING INSTRUCTION 8200-1109-B SP and SPRM Plates Gas Spring Models CU4 1000, CU4 1800, CU4 2900, CU4 4700, CU4 7500, CU4 11800, CU4 18300 Strömsholmen AB P.O. Box 216, SE-573 23 Tranås, Sweden Visiting Address: Verkstadsgatan 16, Tranås Phone: +46 140 571 00 Email: info@kaller.com...
Page 2
Parts List - SP Parts List - SPRM A) *SP plate CU4 1000-18300 A) *SPRM plate B) *SP adapter 1800 - 18300 B) *SPRM adapter C) *Screw bolt C) *Socket head cap screw D) *Upper flange D) *Cap screw plug...
Page 3
2) Unscrew the cover screw (O), M6 (for CU4 1000) or • Before mounting or dismounting the SP or SPRM G1/8” (for CU4 1800 up to and including 18300). If plate, make sure all gas pressure is exhausted.
Page 4
Instructions SPRM 1) Clamp the gas spring in a vice (fitted with protective jaws) with the piston directed downwards. 2) Unscrew the cover screw (O), G1/8” (for CU4 4700 up to and including 18300). If there is no gas pressure inside the spring the bottom plate (G) may rotate.