Page 2
CAU T ION 17. Refit the terminal box cover and reconnect the neon light (reverse of steps 4 and 3). Ensure the wires are fully pushed onto the spade connectors of the neon light. When using Tansun electrical heaters, basic precautions should always be 18.
Do not use an extension cord with this product because the extension • cord may overheat and cause a risk of fire. Keep the mains supply cord away from the body of the heater which will • get hot during use. Arrange the mains supply cord so it cannot be tripped over or damaged.
Page 4
I N T R O D U C T I O N The Rio Grande RF heater produces radiant heat like the sun, warming people and objects rather than the air in between. It is mounted on an adjustable bracket that allows the heat to be directed exactly where it is required.
M O U N T I N G The heater must be mounted in a horizontal (Fig. A) manner only. When mounting the heater, do not position the heater at an angle more than 75° and less than 30° from the mounting surface as shown in Fig.
Page 6
O P E R AT I O N O F H E AT E R M AI N T E N AN C E Please refer to the separate manual(s) provided to connect your remote to the In the event of heater failure, or for spare parts or advice, please contact your heaters built-in receiver.