Cefndy B43 User Instruction

B430 with Wheelchair Friendly Base & B432 Low Height
1. Introduction
The Rise & Fall Table is designed to aid the user for dining, reading or writing. This table offers luxury for both the
user and the carer. Its spring-loaded easy rise and fall mechanism enables clients with poor grip to adjust by finger
action only. It has a large table surface area and is adjustable in height. The beech polished top is hard wearing and
easy to clean, and the retaining table edges prevent items slipping off. The B430 and B432 models have a U-Shaped
frame that enables the products to be used over a bed or around a wheelchair.
B43 Rise & Fall
Table
2. Contents

User Instructions (this leaflet)
3. Assembly Instructions

Carefully unpack and examine the product to ensure that it is complete.

Before use, check for any signs of damage e.g. cracked weld, flaking of paint, bent tube. If any signs occur
please contact your supplier to exchange and refrain from using the product. DO NOT ATTEMPT TO
USE IF PRODUCT IS DAMAGED.
4. Correct Use

The table is designed to help the user by being used as a dining, reading, or writing aid.

The table is not intended to support full body weight so refrain from attempting to lift full body weight via
the product

The table should be placed either against a bed or chair.

Do not attempt to overload the table.
Spring loaded
easy Rise &
Fall mechanism
Ref: B43 Range March 2014
Form No: Cef 0035
User Instruction for the Rise & Fall Table Range
B43 Rise & Fall Table & B431 Low Height Version
Rise (from-to) B43 & B430
Rise (from-to) B431 & B432
Height of legs from floor
Top size
Top size B430
Footprint B43 & B431
Footprint B430 & B432
Description
Castors (Set of 4)
Height Adjustment:

To adjust the height of the table top, press and hold the locking bar
situated on the side of the table, the table top will now freely move.

When the desired height is achieved release the locking bar, the table
top will now lock into position.

To lower the table top height press and hold in the locking bar and
press down on table top (at the column end) to the desired height and
then release the locking bar.
Version
Product specification
750mm – 1100mm
630mm – 825mm
90mm
810mm x 455mm
780mm x 1114mm
810mm x 455mm
970mm x 440mm
Parts list
Part No
70023I/1