SureCross DX81P6 FlexPower Supply Module
Delivers and manages dc voltage from six 3.6V dc lithium primary batteries
Features
For additional information, the most recent version of all documentation, and a complete list of accessories, refer to Banner Engineering's
website, www.bannerengineering.com/surecross.
Models
Model
DX81P6
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury
or death. This product does NOT include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A sensor failure or malfunction can cause either an energized or de-ener-
gized sensor output condition.
P/N 131628 rev. C
• Wireless solution for powering a FlexPower™ Node and sensor device
• Unique power management system to run the FlexPower Node and a device
through switched power outputs for up to five years, depending upon the power
requirements of the device
• Six 3.6V dc lithium "D" cell batteries
• IP67 sealed enclosure
FlexPower systems allow for a true wireless solution as the Node can be powered by
battery power (3.6 to 5.5V dc). Battery life is application specific. Contact Banner En-
gineering's application engineers for a battery life calculation for your specific applica-
tion.
Power
3.6V dc battery
5/27/2011
Batteries
Six 3.6V Lithium "D" Cells
Cable
5-pin Euro pigtail QD
0 131628
5