GigRig doubler Manual

The GigRig Ltd
Unit 85 Basepoint Business Centre
Swindon
SN5 7EX
The GigRig High Current Adapter Manual
As part of The GigRig Modular Power Supply solutions, our high current adapters are all designed to
provide clean and reliable DC power. Each adapter effectively isolates pedals as though their own
individual wall power supplies are being used. Our High Current Adapters also have the advantage of
reverse isolation, so any noise from crosstalk between the powered pedal and other pedals on your
pedal-board is eliminated.
Instructions For Use:
The GigRig Generator connects directly to a Distributor, which is then connected to our High Current
Adapters (HCAs) and Isolators to power your pedals. Simply match the power requirement and DC
polarity of your pedal to the chart below. For example: All Strymon pedals need a TimeLord adapter
as they use the industry standard 9V DC at 500mA with centre negative 2.1 mm plugs.
HCA
TimeLord
EvenFlo
Supa-Nova
El Paso
Doubler
ElectrMan
,
© The GigRig Ltd 2016. Business Reg: 05731704 / VAT: 884568858. All rights reserved.
Design rights claimed. Moral rights asserted.
HCA technical specifications:
VOLTAGE CURRENT
9V DC 550 mA
9V DC 550 mA
12V DC 550 mA
15V DC 400 mA
18V DC 300 mA
24V DC 300 mA
PLUG POLARITY
2.1 mm Centre Neg
2.5 mm Centre Pos
2.1 mm Centre Neg
2.1 mm Centre Pos
2.1 mm Centre Neg
2.5 mm Centre Pos