Related Manuals for zapco Z-PS110B P100A
Summary of Contents for zapco Z-PS110B P100A
- Page 1 Z-PS P100A Power Supplies Owner’s Manual Before operating the unit, please read this manual throughly and retain it for future reference.
-
Page 2: Specifications
Features of the Zapco AC ~ DC Power Supplies Z-PS110B P100A (110 ~ 130 Volt) Z-PS220I P100A (220 ~ 240 Volt) Uses AC power to power equipment that requires 9V ~ 16V DC power. Provides up to 100 amps continuous power adjustable from 9V to 16V. -
Page 3: Important Safety Instructions
Important Safety Instructions This manual contains important safety and operating instructions. To reduce the risk of fire, electric shock, and injury to person or equipment; carefully read the following before you use the power supply. Also, please read all cautionary markings on any product that you will connect to the power supply. Warnings: •... - Page 4 Charting the P100A Power Supplies The controls and functions of the Z-PS110B and Z-PS220I are identical in all ways except AC input voltage. Power-On and Protection Indicators Main Power switch AC Power Connection DC Out Voltage Selector DC Out Negative DC Out Positive Output for LCD Voltmeter Master/Slave Selector In/Out connectors for "Strapping"...
- Page 5 Connecting the P100A Power Supplies Caution: Make all connections before you connect the power supply to AC power 1. Assure that the device requiring power is turned off 2. Assure that the power supply switch is turned off 3. Assure that the Master/Slave switch is set to Master (see instructions below for strapping multiple supplies) 4.
- Page 6 Using Power Supplies with Batteries The Zapco power supplies can be used in combination with a battery or batteries, depending on the usage requirements. Batteries should be 12 volt automotive type. Higher voltage commercial batteries should not be used and will put the supply into protection.
-
Page 7: Using Multiple Power Supplies
Using Multiple Power Supplies Up to four P100A power supplies can be strapped to provide more DC current if required by the powered device. Each supply will add 100 Amps to the circuit for a maximum of 400 Amps. The first supply in such a circuit must be set to Master. All following supplies are set to Slave, then the Master supply's voltage control will set the voltage for all the supplies. - Page 8 Modesto, California USA Since 1974 zapco.com...