Niigata seiki WTI-2030S User Manual

Dial Indicator / Comparator
DIAL INDICATOR
Thank you for purchasing the Niigata Seiki Dial Indicator.
Used with a Magnetic Base or Indicator Stand, this gauge will show the difference in height or position
relative to a zero point set at a reference position.
■
APPLICATIONS
●
For safe and proper use of this product, please read this
instruction manual before use and follow the procedures
described. Please keep manual where it is accessible to
user for future reference.
●
Keep this manual with the instrument if transferred or
leased to a third party.
●
For inquiries about this product, please contact dealer or
Niigata Seiki at the address listed on the following page.
■PART IDENTIFICATION, FUNCTION
① Pointer
( Needle )
② Scale plate
①Pointer ..................
②Scale plate ...............
③Probe .....................
④Bezel .....................
⑤Dovetails ..................
⑥Stem .....................
⑦Mounting bracket
⑧Dovetail groove
⑨Spanner ..................
PROFESSIONAL
Tight places where plunger type Dial Gauge can not be used.
●
Use on milling machines and laths for centering, measure runout, parallelism,
●
flatness, etc.
Mount on height gauge for various measurements.
●
③ Probe ( Stylus )
Shows measurement on the Scale Plate
Graduation. Turn Bezel to rotate
Feeler which contacts workpiece
Rotate to turn Scale Plate
For attaching Stem
For mounting to Holder
......
Connects Stem to gauge
.........
Matches Dovetail in gauge body for mounting Stem
Tool to change Probe
SAFETY NOTIFICATIONS
Throughout this manual,
RISK OF PERSONAL INJURY OR PROPERTY
DAMAGE if not followed.
The
PROHIBITED, and the
REQUIRED step or necessary condition.
④ Bezel

User Manual

WTI -
Model No.
symbol indicates something which is
※Model WTI-8030S shown
⑤ Dovetails
[ Accessories ]
⑥ Stem
( φ6･φ8mm )
⑦ Mounting bracket
⑧ Dovetail groove
⑨ Spanner ( for Probe )
＊＊＊＊＊
symbol indicates
symbol Indicates