Download Print this page
Universal Furniture Explore Home 311966 Assembly Instructions

Universal Furniture Explore Home 311966 Assembly Instructions

Entertainment console

Advertisement

Quick Links

ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure check all packing material carefully for small parts that may have come
loose inside the carton during shipment.
Caution
: (1) These parts are cumbersome and heavy. This product can best be assembled with the assistance of one or more
persons in order to prevent personal injury and to insure parts are not damaged during the assembly process. If dirty, clean
finished parts with mild dishwashing liquid and water solution applied on damp cloth. Cloth should not be excessively wet. Polish
finish with soft cloth and an industry recognized furniture polish.
(2) To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for stain residue and rough
surfaces and also check for staples or nails left after removing the packaging material. The manufacturer will not be held
responsible if preventative steps are not taken prior to installation.
(3) Unpack and dispose of all packing material but be careful not to throw away any assembly parts or hardware. Read the
instruction sheet and parts list carefully. Remove all staples and screws used for packaging carefully using pliers and or
screwdrivers to prevent injury and scratching or damaging flooring.
(4) During normal use every day, screws, bolts, nuts and wooden plugs may loosen up. They should be periodically inspected
and re-tightened to prevent damage to the furniture and (or) personal property or cause injury. Always check to be sure all
hardware on this list and the above mentioned components is attached to the furniture properly and kept tightened at all times.
Parts List:
Description
Top Panel (A)
Bottom Shelf (C)
Hardware List:
1
Wood Screw
Note: Lay out all the parts and hardware to make sure the quantity of each is correct.
Step 1: Place the top panel (A) upside down on a flat, soft surface such as a carpet or cloth to prevent scratching
the finish. Attach base (D) to the top panel (A) using wood screws (1) as shown.
QTY
1 pc
1 pc
30 pcs
Step 1
D
Page 1 of 2
311/ 316/ 318966 Entertainment Console
Description
Middle Shelf (B)
Base (D)
D
Outside rail location for center shelf
assembly
A
QTY
1 pc
2 pcs

Advertisement

loading

Summary of Contents for Universal Furniture Explore Home 311966

  • Page 1 ASSEMBLY INSTRUCTIONS 311/ 316/ 318966 Entertainment Console Thank you for purchasing this quality product. Be sure check all packing material carefully for small parts that may have come loose inside the carton during shipment. Caution : (1) These parts are cumbersome and heavy. This product can best be assembled with the assistance of one or more persons in order to prevent personal injury and to insure parts are not damaged during the assembly process.
  • Page 2 ASSEMBLY INSTRUCTIONS 311/ 316/ 318966 Entertainment Console Step 2: Attach middle shelf (B) to the middle rail of base (D) using wood screws (1) as shown. The metal bases have a rail attached in the center to assemble the shelf. These rails must be on the outside position of the X-shaped bases for the center shelf to assemble properly.

This manual is also suitable for:

Explore home 316966Explore home 318966