Universal Furniture Explore Home 071160 Assembly Instructions

ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure check all packing material carefully for small parts that may
have come l o ose inside the carton during shipment.
Caution: (1) These parts are cumbersome and heavy. This product can best be assembled with the assistance of
one or more persons in order to prevent personal injury and to insure parts are not damaged during the assembly
process. I f dirty, clean finished parts with mild dishwashing liquid and water solution applied on damp cloth. Cloth
should not be excessively wet.
Polish finish with soft cloth and an industry recognized furniture polish.
To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for stain
(2)
residue and rough surfaces and also check for staples or nails l e ft after removing the packaging material. The
manufacturer will not be held responsibl e if preventative steps are not taken prior to installation.
Unpack and dispose of all packing material but be careful not to throw away any assembly parts or
(3)
hardware. Read the instruction sheet and parts list carefully. Remove all staples and screws used for
packaging carefully using pliers and or screwdrivers to prevent injury and scratching or damaging flooring.
During normal use every day, screws, bolts, nuts and wooden plugs may loosen up. They should be
(4)
periodically inspected and re-tightened to prevent damage to the furniture and (or) personal property or cause
injury. Always check to be sure all hardware on this list and the above mentioned components is attached to the
furniture proper1y and kept tightened at all times.
Step 1: The case l e veler system i s designed to use when leveli n g the case to i n sure that the doors open and
close properly in the event of an uneven floor. To adjust, simpl y til t case back and screw leveler in or out to
the necessary position.
Step 1
Page 1of 2
071160 Tall Cabinet