Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS PLEASE READ CAREFULLY
Model No.
200D Series
200DS Series
300 Series
300D Series
300DS Series
300T Series
300TD Series
300TDS Series
400 Series
400T Series
600 Series
600T Series
600TM Series
600TS Series
1. The concrete base should be 6" thick x 14" longer than enclosure ID x 14" wider than enclosure ID.
A. Mark the concrete base for the outside of the enclosure (3" wider than ID and 3" longer than ID).
2. The PVC masking film will help to protect the finish of the metal panels during installation. These
coatings should be left intact and removed only after assembly of the enclosure is complete.
A. Assemble the "B-A-B" (side-end-side) assemblies using hex headed screws. (For best results, insert a
The information contained herein is intended for the use of the individual(s) named above and those authorized to receive it. Dissemination, distribution
or copy of this information is strictly prohibited.
Inside
Dimensions
30"W x 48"L x 40"H
48"W x 48"L x 44"H
22"W x 72"L x 38"H
48"W x 78"L x 44"H
48"W x 91"L x 44"H
22"W x 72"L x 50"H
48"W x 78"L x 50"H
48"W x 91"L x 50"H
26"W x 86"L x 44"H
26"W x 86"L x 54"H
36"W x 100"L x 56"H
36"W x 100"L x 64"H
36"W x 100"L x 70"H
38"W x 120"L x 64"H
Outside
Dimensions
33 3/4"W x 51 1/8"L x 43 1/4"H
51 3/4"W x 51 1/8"L x 47 1/4"H
25 3/4"W x 75 1/8"L x 41 1/4"H
51 3/4"W x 81 1/8"L x 47 1/4"H
51 3/4"W x 94 1/8"L x 47 1/4"H
25 3/4"W x 75 1/8"L x 53 1/4"H
51 3/4"W x 81 1/8"L x 53 1/4"H
51 3/4"W x 94 1/8"L x 53 1/4"H
29 3/4"W x 89 1/8"L x 47 1/4"H
29 3/4"W x 89 1/8"L x 57 1/4"H
39 3/4"W x 103 1/8"L x 59 1/4"H
39 3/4"W x 103 1/8"L x 67 1/4"H
39 3/4"W x 103 1/8"L x 73 1/4"H
41 3/4"W x 123 1/8"L x 67 1/4"H
Recommended Concrete
Pad Dimensions
44"W x 62"L x 6" Thick
62"W x 62"L x 6" Thick
36"W x 86"L x 6" Thick
62"W x 92"L x 6" Thick
62"W x 105"L x 6" Thick
36"W x 86"L x 6" Thick
62"W x 92"L x 6" Thick
62"W x 105"L x 6" Thick
40"W x 100"L x 6" Thick
40"W x 100"L x 6" Thick
50"W x 114"L x 6" Thick
50"W x 114"L x 6" Thick
50"W x 114"L x 6" Thick
52"W x 134"L x 6" Thick
Advertisement
Summary of Contents for Safe-t-Cover 200D Series
- Page 1 Outside Recommended Concrete Model No. Dimensions Dimensions Pad Dimensions 200D Series 30"W x 48"L x 40"H 33 3/4"W x 51 1/8"L x 43 1/4"H 44"W x 62"L x 6" Thick 200DS Series 48"W x 48"L x 44"H 51 3/4"W x 51 1/8"L x 47 1/4"H 62"W x 62"L x 6"...
- Page 2 bead of silicone caulk into the inside bend of the “A” panel corners.) Position both sets of assembled panels on the marked concrete base (Fig 2). 3. Inspect the alignment of the “C” (access) panels during the assembly process. Verify that their removal and replacement allows adequate space and positioning within the openings and with the adjacent panels prior to attaching any bracket to the concrete.
- Page 3 heater(s) as per manufacturer’s instructions and governing local and national codes. 7. For maximum protection, it is suggested that the area between the bottom of the enclosure and the concrete base should be caulked except for the “C” panels. DO NOT CAULK THE BOTTOM OF THE “C”...
- Page 4 Model No. 200D Series Model No. 200DS Series Model No. 300 Series Model No. 300D Series Model No. 300DS Series Model No. 300T Series Model No. 300TD Series Model No. 300TDS Series Model No. 400 Series Model No. 400T Series Model No.